yolo Posted November 7, 2023 Share Posted November 7, 2023 could not access webui after reboot, got ERR_CONNECTION_REFUSED then i tried reload nginx by "/etc/rc.d/rc.nginx reload", got "500 Internal Server Error" i've tried everything i could, here is diagnostics file appreciate any help, THANKS tower-diagnostics-20231107-2233.zip Quote Link to comment
JorgeB Posted November 7, 2023 Share Posted November 7, 2023 Try booting in safe mode after restoring the stock go file. Quote Link to comment
yolo Posted November 7, 2023 Author Share Posted November 7, 2023 38 minutes ago, JorgeB said: Try booting in safe mode after restoring the stock go file. you mean clean the go file and reboot? Quote Link to comment
JorgeB Posted November 7, 2023 Share Posted November 7, 2023 Use a stock go file and reboot in safe mode. Quote Link to comment
yolo Posted November 7, 2023 Author Share Posted November 7, 2023 30 minutes ago, JorgeB said: Use a stock go file and reboot in safe mode. still shows "Unable to connect" in the default FireFox in GUI safe mode Quote Link to comment
yolo Posted November 7, 2023 Author Share Posted November 7, 2023 24 minutes ago, JorgeB said: Post new diags. scp -r [email protected]:/boot/logs/tower-diagnostics-20231108-0108.zip ~/Downloads hostfile_replace_entries: link /root/.ssh/known_hosts to /root/.ssh/known_hosts.old: Operation not permitted update_known_hosts: hostfile_replace_entries failed for /root/.ssh/known_hosts: Operation not permitted failed this time, working on this Quote Link to comment
yolo Posted November 8, 2023 Author Share Posted November 8, 2023 and i found that nginx service was not started after reboot, is this the problem? Quote Link to comment
yolo Posted November 8, 2023 Author Share Posted November 8, 2023 /var/log/nignx/error.log [crit] 1900#1900: *1 connect() to unix:/var/run/php5-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: 192.168.5.21, server: , request: "GET /Dashboard HTTP/1.1", subrequest: "/auth-request.php", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.5.5:5580" 2023/11/08 21:56:56 [error] 1900#1900: *1 auth request unexpected status: 502 while sending to client, client: 192.168.5.21, server: , request: "GET /Dashboard HTTP/1.1", host: "192.168.5.5:5580" Quote Link to comment
JorgeB Posted November 8, 2023 Share Posted November 8, 2023 I would try with a new flash drive using a stock Unraid install, no key needed, if it works copy just the bare minimum from the old install, like the key, device assignments and docker user templates. Quote Link to comment
yolo Posted November 8, 2023 Author Share Posted November 8, 2023 2 minutes ago, JorgeB said: I would try with a new flash drive using a stock Unraid install, no key needed, if it works copy just the bare minimum from the old install, like the key, device assignments and docker user templates. i just delete plugins folder, god, no, i didn't know docker user templates in there, is any way to save that? Quote Link to comment
JorgeB Posted November 8, 2023 Share Posted November 8, 2023 /config/plugins/dockerMan/templates-user Quote Link to comment
yolo Posted November 8, 2023 Author Share Posted November 8, 2023 Just now, JorgeB said: /config/plugins/dockerMan/templates-user yeah, now i know that, but i already delete plugins folder, i thought only plugins in there, oh no Quote Link to comment
Solution yolo Posted November 9, 2023 Author Solution Share Posted November 9, 2023 i started over again with a new flash drive, and of course successed, but i tried copy whole /config folder to the new one, same nginx problem : ( , so without whole /config seems the only way, just copied a few important file, new unraid works fine, haha, and flash backup is soooooooooo important guys Quote Link to comment
yolo Posted November 9, 2023 Author Share Posted November 9, 2023 and thanks for help of @JorgeB all the way, you are so nice, thank you 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.