RabidEars Posted November 17, 2023 Share Posted November 17, 2023 I am attempting to setup UnRaid on an old station I bought in 2015. Booting gets me a black screen with the white cursor flashing at the top. Setup: Board: ASRock FM2A88X-ITX+ (Running BIOS 3.40) CPU: AMD A8-6600K RAM: ADATA 8GB Storage: PNY 250GB SSD & 1 WD 4TB HDD I have the newest UnRAID setup on a SanDisk 8GB USB 2.0 using the UnRaid boot utility. I have tried UEFI with secure boot as well as it off and all I get is either a black screen completely or the one with a white flashing cursor. I have tried all USB ports on the board and the 2 secondary slots available. I have tried disabling USB 3.0 support on the board as well as attempting with all factory defaults reset. Does anyone use this configuration anymore? Maybe I am limited to an older version of UnRAID? I have found 3 other posts with this same board or same CPU and some have trouble woth newesr kernals but never had a resolution. I am not sure what to do at this point. Quote Link to comment
JorgeB Posted November 17, 2023 Share Posted November 17, 2023 That should still work fine, there are people suing much older hardware, try with a different flash drive and make it's working on another computer. Quote Link to comment
itimpi Posted November 17, 2023 Share Posted November 17, 2023 9 hours ago, RabidEars said: Booting gets me a black screen with the white cursor flashing at the top. Have you tried to see if Unraid is visible on the network? It is possible it is loading fine but there is a video driver issue resulting in no output on a directly attached monitor. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.