paulmorabi Posted December 23, 2023 Share Posted December 23, 2023 Hi, I've installed a 10GB NIC (using an Intel 82599) and have connected it via SFP+ to my router. I've been trying different things with the settings but have gotten nowhere with enabling it, apart from needing to remove network.cfg and try again. If I want to disable the onboard NIC and use the 10G NIC instead, my understanding is this needs to be set to eth0 and then disable bonding between the eth0 and 1. I've tried this but its made unraid inaccessible. Does anyone have more info on how to do this? diagnostics attached and many thanks in advance. tower-diagnostics-20231223-1538.zip Quote Link to comment
JorgeB Posted December 23, 2023 Share Posted December 23, 2023 No link is being detected on the 10GbE NIC: Link detected: no Do you have different cable/transceiver you could try? Quote Link to comment
Solution paulmorabi Posted December 28, 2023 Author Solution Share Posted December 28, 2023 Apologies for the late reply. I've been ordering NIC's and cables to test. Yes, you're correct it was a bad cable. All good now. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.