Kev's NAS Posted January 12 Share Posted January 12 Hi there, I'm getting this message in Fix Common Problems with my syslog getting to 100%. I've rebooted a few times to clear the syslog but within a day or two the log is back to 100%. "/var/log is getting full (currently 66 % used)Either your server has an extremely long uptime, or your syslog could be potentially being spammed with error messages. A reboot of your server will at least temporarily solve this problem, but ideally you should seek assistance in the forums and post your Diagnostics." Attached is my diagnostics. I'm clueless on how to resolve without rebooting. Any help would be appreciated, thanks! unraid-diagnostics-20240112-1511.zip Quote Link to comment
Solution JorgeB Posted January 13 Solution Share Posted January 13 Try booting in safe mode and/or closing any browser windows open to the GUI, only open when you need to use it then close again. Quote Link to comment
poloconway Posted January 20 Share Posted January 20 I been having the same issue and can't track down and thing. Log is at 100$ cpu was maxing out while watch movie on Plex, and only one stream going. I have 3 streams going before and never had an issue. Have netdata but really dont understand everything I'm reading. conwayserver-diagnostics-20240119-1947.zip Quote Link to comment
itimpi Posted January 20 Share Posted January 20 Running the command du -h /var/log Should identify the culprit. if you have the Connect plugin installed then are you up-to-date as the last update fixed an excessive logging issue, and have you rebooted since then to reset the log space? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.