February 6, 20242 yr https://ibb.co/z2hYdzF ^ Link to screen capped photo - have hba card - but i cant tell what device is failing, everything on the card is ssd and everything else is on mobo directly I changed over from a desktop tower previously due to poor air ventilation , plugged it in to the new case today and got this error, is this just cause parity needs to process? the only error im seeing is the "invalid parity' am i over analyzing this? or its just parity needs to run? I can access all the drives. i see them all in the menus
February 6, 20242 yr Author tower-diagnostics-20240206-0623.zip is this what you needed? Not i ran this after a reboot. I will send it if it crashes, I also bought new sata cables, after a few hours of running came back to the machine, in main everything was blank, reboot everything came back, dont remember running into this, last time i used unraid :< thanks! Edited February 6, 20242 yr by Marieon relized i rebooted before getting the diag info and noticed that all drives were not showing in main.
February 6, 20242 yr Community Expert Parity is syncing, no errors so far, let it finish, any issues post new diags before rebooting.
February 7, 20242 yr Author Okay while i was gone it looks like the device rebooted x.x during parity https://ibb.co/xgsLvNX , I wondering if its the parity drive is failing - everything says healthy, but Iv been running a extended smart test on the parity drive for over 30 mins and it hasnt passed 10 percent. hmm heres the dump, any advice is appreciated - the two 18 tb hdds are still under warranty/ can be swapped out. Thanks! tower-diagnostics-20240207-0426.zip
February 7, 20242 yr Community Expert 15 minutes ago, Marieon said: I wondering if its the parity drive is failing - everything says healthy, but Iv been running a extended smart test on the parity drive for over 30 mins and it hasnt passed 10 percent. That test increments in 10% intervals and you can assume something like 1 to 2 hours per TB.
February 7, 20242 yr Community Expert 16 minutes ago, Marieon said: Okay while i was gone it looks like the device rebooted x.x during parity Do you mean the server rebooted on its own? That's almost always a hardware problem, or bad power.
February 7, 20242 yr Author How does one tell if the usb is failing? Noticing it wasn't blinking, maybe swap to another usb if that isn't an issue. Oh and how do you tell the cpu temps? I can see the stress on the core just not temps. https://ibb.co/L8mf6Wy
February 7, 20242 yr Author 4 minutes ago, JorgeB said: Do you mean the server rebooted on its own? That's almost always a hardware problem, or bad power. 7 disk, rtx 4000 , 850 watts psu hmm
February 7, 20242 yr Community Expert Solution You likely have a hardware issue, also make sure this has been taken care of: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173
February 7, 20242 yr Author I will check the bios and couldn't find the option, im installing win 10 to pull the updated bios i will have to fllow up with this out tonight. Thanks.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.