BurningSky Posted February 8 Share Posted February 8 I noticed a container had stopped with a message about the log being RO so having looked at a couple of other similar looking issues decided to delete the docker.img to see if that would help. After that the Docker service wouldn't restart and I noticed in the logs it looked like a cache issue so I rebooted to see if that would resolve it. That let to the cache showing an "Unmountable: unsupported or no file system" error. Based on another forum post I ran "btrfs rescue zero-log /dev/sdi1" and restared the array and the pool appears to be back now but I'm worried if there is a deeper issue? I've attached 2 sets of logs, 1411 was before I ran the rescue command and 1414 is after. Does it look like sdi1 is going to fail or was there another potential cause. ragon-diagnostics-20240208-1414.zip ragon-diagnostics-20240208-1411.zip Quote Link to comment
Solution JorgeB Posted February 8 Solution Share Posted February 8 49 minutes ago, BurningSky said: Based on another forum post I ran "btrfs rescue zero-log /dev/sdi1" and restared the array and the pool appears to be back now but I'm worried if there is a deeper issue? The problem was the log tree, so that was the correct fix, if that was the only issue the pool should be fine now, if the same issue reoccurs in the near future, and that is not that uncommon, then I would recommend reformatting the pool. Quote Link to comment
BurningSky Posted February 8 Author Share Posted February 8 55 minutes ago, JorgeB said: The problem was the log tree, so that was the correct fix, if that was the only issue the pool should be fine now, if the same issue reoccurs in the near future, and that is not that uncommon, then I would recommend reformatting the pool. Thanks for the feedback, I'll keep an eye on it. Doesn't point to a disk failure though? Quote Link to comment
BurningSky Posted February 8 Author Share Posted February 8 1 minute ago, JorgeB said: Nope, filesystem issue. Thanks, it happened again so I'll format the cache once I've copied data off Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.