October 31, 201114 yr I have a bunch of tv shows that wont move off the cache drive, some are on the actual array while others stay on the cache disk. I've tried forcing the mover script to run which works for some things but it's like these shows are stuck, is there another way I can force everything over? This is what the TV share looks like now. It wasn't set this like this begin with but I changed it hoping the 0 would force more over.
October 31, 201114 yr You didn't provide enough info. However, the mover script typically fails when the split level, allocation method and min. free space are set wrong which forces unRAID to attempt to move data to a full array disk. Peter
October 31, 201114 yr Author I changed my split level to 2 for TV which is what doesn't seem to want to move. My dir structure is /TV/Show/Season/Files Moves are set to 1 and they work fine with a structure of /Movies/Movie_File Also, I turned on logging to watch what's going on but I can't find where it logs it. :-)
October 31, 201114 yr with that split level, it wont break up a season. My guess is the drive with that season on it is full. also, having min free space 0 is not good, you really should set it at 50 gigs or something you like
October 31, 201114 yr Author Ah, damn, so two drives are full and those must be where these shows are so no more files can be copied there? Got it. So I should change to split level 3 to allow seasons to be split up? Why should I leave a buffer of free space?
October 31, 201114 yr The free space doesn't much matter with the most-free allocation method. It won't help one bit when you run into a disk full error due to the split level, like you appear to have just had happen. You either use a split level of 3 and let the files for the seasons go to whatever disk is free or you move a bunch of your current TV shows from the full disks to an empty disk to free up some space. If you really don't care where the files go then you might as well use a split level of 99 and eliminate these problems. Peter
October 31, 201114 yr Author Should I care, Ideally you never really need to know what disk the files are on right? ;-)
October 31, 201114 yr I like to know, that way if the worst happens - I lose a disk - I either have the TV series or I don't. Otherwise, I have to piece it back together. Similarily, losing some songs from different artists would be a pain to recover from.
October 31, 201114 yr I like to know, that way if the worst happens - I lose a disk - I either have the TV series or I don't. Otherwise, I have to piece it back together. Similarily, losing some songs from different artists would be a pain to recover from. Agree but assuming your parity disk doesn't fail at the same time as an array disk, this shouldn't matter right?
November 1, 201114 yr I like to know, that way if the worst happens - I lose a disk - I either have the TV series or I don't. Otherwise, I have to piece it back together. Similarily, losing some songs from different artists would be a pain to recover from. Agree but assuming your parity disk doesn't fail at the same time as an array disk, this shouldn't matter right? No, it doesn't matter assuming 2 array disks will never fail at the same time. Any double disk failure can mean the loss of 2 disks of data and making an error during the failure can cause a loss of a single disk of data. Sounds like you need to read-up on how the parity protection works since it seems you are incorrectly assuming that you only need the parity disk to recover from a disk failure. Peter
November 1, 201114 yr The most common 2 drive fail is when you have a single drive and a second fails durring rebuild. This is a good reason for the monthly parity checks.
Archived
This topic is now archived and is closed to further replies.