Array has 2 SMART errors – Both drives are passing SMART tests

[Bronson15]

The dashboard keeps showing me that two of my drives has SMART errors. I ran an extended SMART test on each of the drives and they both showing passing.

 

Any tips? I am new to SMART reports.

[JorgeB]

What errors are they? Hover the mouse on the thumbs down icon to show.

[Bronson15]

1 hour ago, JorgeB said:

What errors are they? Hover the mouse on the thumbs down icon to show.

One drive says this:

 

The other just says this:

[JorgeB]

The bottom one should be fine, top one doesn't look good, and the extended SMART test passed?

[JorgeB]

On the bottom one you can click on the thumbs down and then acknowledge.

[Bronson15]

13 minutes ago, JorgeB said:

The bottom one should be fine, top one doesn't look good, and the extended SMART test passed?

 

Welllllll, I see "SMART overall-health" as passed, but it actually looks like the SMART test never got past 10%.

[JorgeB]

5 minutes ago, Bronson15 said:

I see "SMART overall-health" as passed, but it actually looks like the SMART test never got past 10%

That's not the same thing, post the SMART report.

[Bronson15]

8 minutes ago, JorgeB said:

That's not the same thing, post the SMART report.

ST3000DM001-1CH166_Z1F448VJ-20240223-1058.txt

 

As requested. Would you mind walking me through what you're looking for in here so I can understand as well? Thanks!

[JorgeB]

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 90%     40053         -
# 2  Extended offline    Aborted by host               90%     40030         -
# 3  Extended offline    Aborted by host               90%     39615         -

 

Looking at the SMART test results, but it didn't finished yet, see if it does and it passes or fails, but given the attributes, I would expect it to fail, BTW, also a good idea to check the results of the other disk.
 

[Bronson15]

5 minutes ago, JorgeB said:

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 90%     40053         -
# 2  Extended offline    Aborted by host               90%     40030         -
# 3  Extended offline    Aborted by host               90%     39615         -

 

Looking at the SMART test results, but it didn't finished yet, see if it does and it passes or fails, but given the attributes, I would expect it to fail, BTW, also a good idea to check the results of the other disk.
 

Yeah I aborted twice because it didn't get past 10% after 415 hours on the first one.

 

Failing meaning replace the drive? Is 40,000 hours of a drive normal? I've only had it for a year and a few months, so that number seems off to me.

 

EDIT: Oh wait this actually was my old gaming HDD.

 

Will do a run on the other drives

Edited February 23 by Bronson15

[JorgeB]

13 hours ago, Bronson15 said:

Failing meaning replace the drive?

Yes, if the SMART test fails a drive should be replaced.

[Bronson15]

9 hours ago, JorgeB said:

Yes, if the SMART test fails a drive should be replaced.

Would you consider never progressing past 10% a failure? It is still hung there.

[JorgeB]

In this case, and given the terribly looking SMART report, I would.