February 24, 20242 yr I was running docker safe new perms and I discovered disk 11 was disabled with read errors (sdi). I attached my diagnostics below, and wanted to see if this should be of concern and the best way forward. Also should I be worried about the "x86/split lock detection" errors? Thanks! toblerone-diagnostics-20240224-0154.zip
February 24, 20242 yr Problems communicating with multiple disks. Looks like this controller 01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI Fusion-MPT 12GSAS/PCIe Secure SAS38xx [1000:00e6] Subsystem: Broadcom / LSI 9500-16i Tri-Mode HBA [1000:4050] Kernel driver in use: mpt3sas Kernel modules: mpt3sas Is it overheating? Maybe try reseating it.
February 24, 20242 yr Author I don't think its overheating it gets pretty good airflow with the fans in the 4u case. I'll definitely have to try reseating it, I have to finish rebuilding an existing drive first tho only a few more hrs. Just looking to learn, where can I see that its having problems communicating with some disks?
February 25, 20242 yr Author I thought it might be the backplane of my 4U case wasn't getting enough power, so I took out some drives I was preclearing back to what it was before. The "Power-on or device reset occurred" error still persist. I know I recently switched HBAs from the 2008 to 9500, so I switched it back and switched back the cables and its still persisting. I'm really lost and don't know whats wrong.
February 25, 20242 yr Author I have tried switching PCIe slots and tried manually setting link speed to gen2. Still no go. However I did notice in the BIOS, the drives aren't showing up like they used to within the BIOS. I remember them showing up on the main bios page before.
February 26, 20242 yr I would try connecting some drives directly to the board SATA controller, bypassing the backplane, and test like, if OK, retest with the HBA but still bypassing the backplane.
February 27, 20242 yr Author Hmm I will have to try that. I was looking at the diagnostics ive sent and it seems like I have always had this issue, but never really noticed it till trurl pointed it out. For some reason in the past, ive never seen it in the logs until recently.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.