Benz0ate Posted April 8 Share Posted April 8 (edited) I'll start by saying I've had this server for about 3 years now but have almost no clue what I am doing. I've built everything by following youtube videos and articles. I have 0 Linux experience and use the GUI 100% of the time. Running Version 6.12.4 Woke up this morning to a notification on my phone from Plex that a drive is corrupt. Went on the server GUI, didn't see anything so did a reboot. upon reboot my cache drive(M.2 Drive) says this: Quote Unmountable disk present: Cache • Samsung_SSD_970_EVO_Plus_1TB_S6S1NG0R651236W (nvme0n1) Quote CacheSamsung_SSD_970_EVO_Plus_1TB_S6S1NG0R651236W - 1 TB (nvme0n1)40 C118180btrfsUnmountable: Unsupported or no file system On my plex server some of the stuff works perfect and some has no pictures and cannot play the video as it says not found. But I don't see any issues with my drives? All of my dockers seem to be missing, assuming all that info is on the cache drive. What's my best option here and easiest to follow for a Linux novice? SMART Report posted below: Quote === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - available spare has fallen below threshold - media has been placed in read only mode smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.49-Unraid] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: S6S1NG0R651236W Firmware Version: 3B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 407,024,009,216 [407 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 561151b82d Local Time is: Mon Apr 8 08:47:16 2024 PDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.54W - - 0 0 0 0 0 0 1 + 7.54W - - 1 1 1 1 0 200 2 + 7.54W - - 2 2 2 2 0 1000 3 - 0.0500W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - available spare has fallen below threshold - media has been placed in read only mode SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x09 Temperature: 40 Celsius Available Spare: 0% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 52,694,840 [26.9 TB] Data Units Written: 119,506,122 [61.1 TB] Host Read Commands: 103,832,902 Host Write Commands: 648,622,107 Controller Busy Time: 11,773 Power Cycles: 39 Power On Hours: 4,168 Unsafe Shutdowns: 22 Media and Data Integrity Errors: 18 Error Information Log Entries: 18 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 40 Celsius Temperature Sensor 2: 59 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged unraid-diagnostics-20240408-1306.zip Edited April 8 by Benz0ate Attached System Diagnostics Quote Link to comment
itimpi Posted April 8 Share Posted April 8 You are likely to get better informed feedback if you attach your system’s diagnostics zip file to your next post in this thread. It is always a good idea when asking questions to supply your diagnostics so we can see details of your system, how you have things configured, and the current syslog. 1 Quote Link to comment
Solution JorgeB Posted April 8 Solution Share Posted April 8 1 hour ago, Benz0ate said: === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - available spare has fallen below threshold - media has been placed in read only mode It's logged as a device problem, and SMART confirms it, you will nee to replace the device. Quote Link to comment
Benz0ate Posted April 8 Author Share Posted April 8 59 minutes ago, JorgeB said: It's logged as a device problem, and SMART confirms it, you will nee to replace the device. Thanks, what's the easiest way to get the data off this device to copy onto new drive? Or is that not an option? Quote Link to comment
JorgeB Posted April 9 Share Posted April 9 You can try mounting the filesystem read-only, and if it works then copy the data elsewhere: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=543490 Quote Link to comment
Benz0ate Posted April 10 Author Share Posted April 10 Thanks, was able to copy data off old drive, install new m.2 & copy data back. Now time to make some legit backups. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.