Squashyware Posted April 11 Share Posted April 11 I am new to unraid and on a trial licence. Running on a HP Microserver Gen 8 After a couple of hours building the initial parity check the server is rebooting and I cannot see why. Attached the diagnostic info, hopefully thats the useful thing! Is anyone able to offer any suggestions? I heard the reboot beep at approx 14:06 hpmicro-diagnostics-20240411-1407.zip Quote Link to comment
Solution JorgeB Posted April 11 Solution Share Posted April 11 Server rebooting on its own is almost always a hardware issue, or bad power, also the syslog in the diags starts over after every boot, so it won't help, you can enable the syslog server, but if it's hardware related, most likely there won't be anything relevant logged. Quote Link to comment
Squashyware Posted April 16 Author Share Posted April 16 Thank you. After lots of fiddling, looks like a faulty RAM issue 1 Quote Link to comment
itimpi Posted April 17 Share Posted April 17 On 4/16/2024 at 6:47 PM, Squashyware said: Thank you. After lots of fiddling, looks like a faulty RAM issue If you have not tried it already running with less RAM sticks can sometimes help as it puts less load on the RAM controller. Quote Link to comment
Squashyware Posted April 25 Author Share Posted April 25 On 4/17/2024 at 11:32 PM, itimpi said: If you have not tried it already running with less RAM sticks can sometimes help as it puts less load on the RAM controller. Thanks I should have tried that to be safe but bought a new set of ram and all good. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.