May 5, 20242 yr I have 2 hard drives, that used to be in my array that unraid won't see now. Both drives are working with no smart errors and show up in unassigned devices when connected to unraid through a sata to usb adapter. However, when the drives are plugged directly into the motherboard or LSI controller they will not be seen by unraid. I ran a pre clear on each of the 2 disks while they were plugged into the sata to usb adapter and unraid still will not recognize them when they are plugged into the motherboard. Any ideas?
May 5, 20242 yr Community Expert Are they by any chance shucked drives? If so they may have the 3.3v SATA issue.
May 6, 20242 yr Author Question: What is a shucked drive? These drives were in unraid since new and have been working fine for years. Recently I had other unraid issues and had to create a new config and that's when they stopped being seen by unraid.
May 6, 20242 yr Community Expert Are they detected in the board BIOS when connected to the onboard SATA?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.