chowpay Posted May 8 Share Posted May 8 Just got my unraid server setup and precleared a couple of drives to start my migration. Following the Trash hard link tutorial I created a data share. My goal is to first mount my existing 18T drive and migrate the data to the new array w/o cache. The current array is 2X18T drives. After its migrated I'll add it to the array and enable caching etc. But my end result ideally is that data fills up one drive then spills onto the next one, so on and so forth. I don't want the array to spin up all drives because a user is watching a movie or show where bits and pieces are in other drives . Because of this I disabled splitting and just left it as high water mark. Currently I have 2 drives in the array and I made my share /data -usernet --complete ---movies ... Question: Now lets say I rsync my mounted media drive from media/.../movies to(mounted drive) to >>> /data/usenet/complete/movies (array share) because I set highwater mark it should all go to 1 drive first then spill over to the next as it fills right? Once this is done I'll add in the parity drive but does this sound ok? Anything I need to watch out for? Quote Link to comment
Solution JonathanM Posted May 9 Solution Share Posted May 9 17 hours ago, chowpay said: Anything I need to watch out for? Split level overrides high water, so if the copying method creates empty folders and then fills them, the allocation method won't be applied. Quote Link to comment
chowpay Posted May 13 Author Share Posted May 13 (edited) Thanks, Ended up not doing split and letting unraid just use highwater to drop it into the next drive as it fills up. I think the odds of having a media file thats spread across drives is low . Feel free to tell me other wise but I assume everything kinda sticks together except for the item that is at that watermark line. For those curious this ended up being my process: Drop in 2 array drives preclear them and add to array mount one of the two mirrored NTFS drives from my original server and rsync the data across to the array Migrate all starr services and get swing them away from the old server to and get it writing to the array added in SSD mirrored cache drive pool preclear the drive from #3 and add it to the array enable cache pool add in pre-cleared parity drive (currently in parity-sync stage) once its built preclear remaining NTFS drive and add it in to the array once parity is established add in Edited May 13 by chowpay Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.