June 5, 20242 yr Hello everyone, I need help due to a failure of my boot USB. I replaced it with my backup zip file loaded from my Unraid account, but since then, my server won't boot, no matter which USB port I use. I've disabled fast boot, but nothing changes. I made sure the boot order in the BIOS is correct and that I’m using EFI because I'm on UEFI. I’m out of solutions. If anyone can help, I would greatly appreciate it. Thank you in advance.
June 5, 20242 yr Community Expert Try recreating the flash drive, backup the current config folder first, recreate using the USB tool, see if it boots, if yes, restore the config folder
June 5, 20242 yr Author first thank you for your quick response but before starting the procedure tell me how I can restore later if it ever works
June 5, 20242 yr Community Expert 15 minutes ago, BalHaise said: first thank you for your quick response but before starting the procedure tell me how I can restore later if it ever works All your settings (and licence) are in the config folder on the flash drive so as long as you have backed that up you can always get back to where you were.
June 5, 20242 yr Author 33 minutes ago, JorgeB said: Try recreating the flash drive, backup the current config folder first, recreate using the USB tool, see if it boots, if yes, restore the config folder I tried this method it didn't work I'm trying with another usb 14 minutes ago, itimpi said: All your settings (and licence) are in the config folder on the flash drive so as long as you have backed that up you can always get back to where you were. thanks I just have to do a copy and paste, right?
June 5, 20242 yr Author So when I boot I either go back to the bios or I get stuck on the image allowing access to the bios. However, with each reboot I hear a clicking noise in the box, I don't see where it comes from
June 5, 20242 yr Community Expert That suggests some issue with the boot settings, or a flash drive problem, see if it boots in a different PC.
June 7, 20242 yr Author On 6/5/2024 at 4:27 PM, JorgeB said: That suggests some issue with the boot settings, or a flash drive problem, see if it boots in a different PC. sorry because of work I couldn't respond before and thank you I found a solution by deleting the realtek driver
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.