Hdd failed new drive larger then parity need Parity-Swap with out loss

[Landermark]

I have 2 drive 14tb parity and 14tb drive and the drive failed so now I need to replace the drive to rebuild lost data but I only have a 16tb drive to replace it with now it is needing a Parity-Swap is this simple and will I still have my data plz help

tower-diagnostics-20240620-2336.zip

[JorgeB]

See parity swap.

[Landermark]

it wont let me keeps saying to many drives missing

 

[JorgeB]

I missed that in your screenshot disk2 is showing as new, you cannot add a new disk at the same time you are trying to rebuild another.

[Landermark]

I have tryed this it just says it missing a drive the disk 2 when there was a disk in there it never formatted it just failed and I removed it

[Landermark]

this is when looking at the super.dat if you look at the first screen shot that's the drive that never worked and yes I know its a SSD I have a rma for it but have not mailed it yet

[JorgeB]

3 hours ago, Landermark said:

there was a disk in there it never formatted it just failed and I removed it

If there was a disk there and you let it remain disabled, now you will be stuck, since you have two invalid disks with single parity.

[Landermark]

is there a way to remove that disk from the config as it had no data?

you are right I am stuck lol its why I have asked to help

[itimpi]

44 minutes ago, Landermark said:

is there a way to remove that disk from the config as it had no data?

you are right I am stuck lol its why I have asked to help

Unfortunately not as the system would have been assuming its presence in all parity calculations.

 

Are you actually sure that you had a disk failure or did you just assume it had failed because it was marked with a red 'x' to indicate it has been disabled?   The red 'x' means that a write to the drive failed so it is no longer synced with parity, but often the write failure is caused by an external factor and the drive is actually OK and most of the data on it can still be intact and recoverable.

[Landermark]

It won't attach the drive and it makeing a funny nose click clonk click

[Landermark]

Can I get the data if I send it away will providers work with xfs ?

[Landermark]

is there a way to remove that disk from the config as it had no data?

you are right I am stuck lol its why I have asked to help

 

is it possible to read the data on the parity without unraid using a tool there is like a hand full of files I need and it was almost used like mirror as the other drive did not have files on it

[JorgeB]

5 hours ago, Landermark said:

is there a way to remove that disk from the config as it had no data?

Having no data doesn't really matter, do you know if that a new never used before disk, or a disk that was precleared or cleared before adding to the array?