August 29, 20241 yr Hello. I'm getting a red X on Disk 1. Says drive is being emulated. I went ahead and did the "check filesystem" Didn't seem to help. If you could please help with any information, that would be great. I have attached the Diagnostics file. Thank you importimage-diagnostics-20240828-2224.zip
August 29, 20241 yr Community Expert Disk was already disabled at boot so we can't see what happened, but looks healthy, so most likely a power/connection problem, check/replace cables to rule that out and if contents look correct you can rebuild on top: https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself
August 29, 20241 yr Community Expert 4 hours ago, Importimage1 said: I went ahead and did the "check filesystem" Didn't seem to help Did you run without the -n (no modify) flag so that corrections were allowed?
August 29, 20241 yr Author 3 hours ago, itimpi said: Did you run without the -n (no modify) flag so that corrections were allowed? Hello. Yes I did this first. Currently doing the rebuild on top process. Thank you for your help
August 29, 20241 yr Author 5 hours ago, JorgeB said: Disk was already disabled at boot so we can't see what happened, but looks healthy, so most likely a power/connection problem, check/replace cables to rule that out and if contents look correct you can rebuild on top: https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself Great. I Just started to do the rebuild on top process. Thank you very much for your help. Will check back once it's complete. Thank you
August 29, 20241 yr Author 19 minutes ago, Importimage1 said: Great. I Just started to do the rebuild on top process. Thank you very much for your help. Will check back once it's complete. Thank you So After about 10min it stopped and now the red X is next to Disk 1 again. I attached the diagnostics. importimage-diagnostics-20240829-0713.zip
August 29, 20241 yr Author It has around 1K errors to Disk 1. Should I start it again and let let it continue? It started to write to it, and now it's not writing anything. Only reading from the other drives.
August 29, 20241 yr Community Expert Did you 5 hours ago, JorgeB said: check/replace cables to rule that out
August 29, 20241 yr Author 2 minutes ago, JorgeB said: Did you Hello. I checked the cables and they were okay.
August 30, 20241 yr Community Expert Doesn't look like a disk problem, I would replace or swap the cables and try again.
August 30, 20241 yr Community Expert 5 hours ago, JorgeB said: I would replace or swap the cables and try again.
August 30, 20241 yr Author 17 minutes ago, JorgeB said: Okay. I will try that. So I had a power outage a couple days ago. So I believe that this is how this happened. It started to do a parity sync and started to find a lot of errors on other drives. They did not have the red X just errors. It froze and now I can't access the GUI or anything inside Unraid. Thank you
August 30, 20241 yr Author Okay so now I',m getting Disk 3 saying its unmountable unsupported or no file system. I've attached a new Diagnostics. Thank you importimage-diagnostics-20240830-0948.zip
August 30, 20241 yr Community Expert Also looks like a power/connection problem, try replace the cables, can also be a PSU problem.
August 30, 20241 yr Author 20 minutes ago, JorgeB said: Also looks like a power/connection problem, try replace the cables, can also be a PSU problem. Okay. Thank you. I will try cables first and then if that doesn't work, I will replace the PSU
August 30, 20241 yr Author 1 hour ago, JorgeB said: Also looks like a power/connection problem, try replace the cables, can also be a PSU problem. Hello. So now all drives are showing up, but still a rex X on Disk 1. Seems like maybe one of the drives was loose. Now just trying to see how to fix the Emulated Disk 1. Here is an updated diagnostics. importimage-diagnostics-20240830-1142.zip
August 31, 20241 yr Community Expert Emulated disk1 is mounting, assuming contents look correct you can rebuild on top: https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself
September 6, 20241 yr Author I just replaced my power supply with a new 1000W. Still having issues. Some drives are not showing up. Not sure if these drives are bad. The WD drives are ok, I just need to connect it to sata power cable. If you could please take a look at the diagnostics. Thank you for your help. importimage-diagnostics-20240905-2248.zip
September 6, 20241 yr Author 36 minutes ago, JorgeB said: Do they show up in the board BIOS? When I restart Unraid I could see my HBA card and then under that it shows all my drives connected. Shows all 15 drives
September 6, 20241 yr Community Expert Connect one of the drives that is not showing up to the onboard SATA controller and post new diags if it still doesn't show up, also make sure you hear the drive spinning up.
September 7, 20241 yr Author On 9/6/2024 at 6:57 AM, JorgeB said: Connect one of the drives that is not showing up to the onboard SATA controller and post new diags if it still doesn't show up, also make sure you hear the drive spinning up. Okay. So I was able to do do a rebuild on top of Disk 1. After completing, it now says disk is unmountable importimage-diagnostics-20240907-1646.zip
September 8, 20241 yr Author Also my available space is what I use to have but missing thousands of movies. When I click on some of the disk and click on movies, it shows the titles but then nothing inside of the those folders. Should I do a parity sync? Thank you
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.