September 25, 20241 yr Hi guys, I notice that my parity check always get stuck halfway, im unable to stop it or pause it unless i reboot the whole server. When i check the logs im flooded with this message "shfs: share cache full", although my array and cache pool still have free spaces. Help needed! Attached diagnostics report, let me know if more info is required Thanks all tower-diagnostics-20240925-1238.zip Edited September 25, 20241 yr by Enjawd
September 25, 20241 yr Community Expert Unraid driver is crashing, this is almost always a hardware issue, and since you have a 13900 it may be a bad CPU, you can try v7-beta to rule out any kernel compatibly issue, if it still crashes it almost certainly hardware. share cache full means that you have a share using a pool where the floor is set higher than the currently available space on the pool, you just need to correct that, or ignore, if that's the floor setting you want.
September 25, 20241 yr Author 1 hour ago, JorgeB said: Unraid driver is crashing, this is almost always a hardware issue, and since you have a 13900 it may be a bad CPU, you can try v7-beta to rule out any kernel compatibly issue, if it still crashes it almost certainly hardware. share cache full means that you have a share using a pool where the floor is set higher than the currently available space on the pool, you just need to correct that, or ignore, if that's the floor setting you want. Hi JorgeB, Thanks for your reply. Just to clarify, bad CPU as in faulty? or not compatible? Cause, docker and vm are running fine, only the parity always hang up Edited September 25, 20241 yr by Enjawd
September 25, 20241 yr Community Expert 20 minutes ago, Enjawd said: only the parity always hang up Does the system hang or just the parity check and he system remains responsive?
September 25, 20241 yr Community Expert 57 minutes ago, Enjawd said: Just to clarify, bad CPU as in faulty? There have been a lot of issues with Intel 13900 and 14900 CPUs (and other models from those generations) some estimate that as high as 50% of the CPUs are affected in the long run, you can Google it for more info.
September 26, 20241 yr Author 16 hours ago, itimpi said: Does the system hang or just the parity check and he system remains responsive? just parity hang only, other function including docket and vm all working as per normal.
September 26, 20241 yr Author Just to update. i adjust disable the cache more to secondary (array) leaving it on primary. and disable docker. no more error found on logs and parity was completed successfully.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.