December 19, 20241 yr Press the trash can or you can delete the file in /boot/config/modprobe.d called i915.confg
December 19, 20241 yr Author 12 minutes ago, SimonF said: Press the trash can or you can delete the file in /boot/config/modprobe.d called i915.confg after i reboot the i915.conf apears again😭
December 19, 20241 yr Solution 4 hours ago, Wesley Wang said: after i reboot the i915.conf apears again😭 If you got the SRIOV plugin installed this is by design because the plugin enables the module with the necessary options. I already explained that here: If you don't have the SRIOV plugin installed this could be also be caused by the GVT-g plugin where it is almost the same.
December 28, 20241 yr On 12/19/2024 at 8:22 PM, ich777 said: If you got the SRIOV plugin installed this is by design because the plugin enables the module with the necessary options. I already explained that here: If you don't have the SRIOV plugin installed this could be also be caused by the GVT-g plugin where it is almost the same. Can the developer make an xe driver? The dg1 graphics card cannot be used now.
December 29, 20241 yr 3 hours ago, pennyw15e said: Can the developer make an xe driver? The dg1 graphics card cannot be used now. Nope, you have to wait for official support in the Kernel. Please look at this post:
January 8, 20251 yr 我核显突然消失了，请问是什么原因？CPU 13900K 主板 pro art z790 貌似核显变成Host bridge: Intel Corporation Device a700 看驱动貌似有i915这一项，系统设备里就是找不到核显，在一次常规关机后突然发现使用虚拟核显的群晖没有自启动，一排查发现核显没了 On 12/29/2024 at 10:43 AM, ich777 said: Nope, you have to wait for official support in the Kernel. Please look at this post:
January 8, 20251 yr 25 minutes ago, ArchonX said: 看驱动貌似有i915这一项，系统设备里就是找不到核显，在一次常规关机后突然发现使用虚拟核显的群晖没有自启动，一排查发现核显没了 Please post your Diagnostics.
January 8, 20251 yr 17 minutes ago, ArchonX said: unraid-diagnostics-20250108-2005.zip 129 kB · 0 downloads Please double check that your iGPU is enabled in your BIOS, some iGPUs need a physical display connected so that the iGPU even activated. From what I can see in your Diagnostics everything seems fine and nothing should prevent your iGPU from showing up but I even don't see it in the device list so my suspicion is that something in the BIOS is set not correctly. Since this is a ASUS BIOS make sure that you enable Multi Monitor Support since this should activate you iGPU no matter what but I have to admit that on earlier BIOS versions on my Motherboard (ASUS Z490E-GAMING) I had to use a HDMI Dummy plugin on the Motherboard to even get iGPU activated and that I can see it in the PCI device list.
January 9, 20251 yr 18小时前，ich777说： 请仔细检查您的iGPU是否在BIOS中启用，一些iGPU需要连接物理显示器，以便iGPU甚至被激活。 从我在您的诊断程序中看到的情况来看，一切似乎都很好，没有什么能阻止您的iGPU显示，但我甚至在设备列表中都没有看到它，所以我怀疑是BIOS中的某些东西设置不正确。 由于这是华硕BIOS，请确保您启用多显示器支持，因为无论如何这都应该激活您的iGPU，但我不得不承认，在我的主板（华硕Z490E-GAMING）上的早期BIOS版本中，我不得不在主板上使用HDMI虚拟插件来激活iGPU，我可以在PCI设备列表中看到它。 感谢 我确实前两天拔掉了主板的HDMI线之后才出现上述问题的，我稍后会尝试恢复HDMI链接看看，核显能不能正常工作
January 9, 20251 yr 2 hours ago, ArchonX said: 感谢 我确实前两天拔掉了主板的HDMI线之后才出现上述问题的，我稍后会尝试恢复HDMI链接看看，核显能不能正常工作 If that is working maybe a HDMI Dummy plug (with a valid EDID - 1080p) can help if you usually don't have a display attached.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.