December 20, 20241 yr Hello all, I’ve been in contact with the Unraid support team and they said unfortunately they cannot help me but try the community to see if they can help. I currently have the Beelink EQ14 running on a N150 CPU, I want to enable some of the GPU capabilities however the drivers are not working (attached example). Speaking to Beelink they said that Linux needs to be on 6.12.5 I believe unRAID is on 6.1.33? Does anyone have any ideas for a workaround? thank you
December 20, 20241 yr 14 minutes ago, bling_blong_blah said: unRAID is on 6.1.33? v7 is on kernel 6.6, but not sure if it supports that GPU, maybe @ich777will know.
December 20, 20241 yr 30 minutes ago, bling_blong_blah said: Hello all, I’ve been in contact with the Unraid support team and they said unfortunately they cannot help me but try the community to see if they can help. I currently have the Beelink EQ14 running on a N150 CPU, I want to enable some of the GPU capabilities however the drivers are not working (attached example). Speaking to Beelink they said that Linux needs to be on 6.12.5 I believe unRAID is on 6.1.33? Does anyone have any ideas for a workaround? thank you Can you post diagnostics? If it needs the XE driver then its not currently available, Alder lake is supported, but not sure about -N Do you have intel_gpu_top plugin loaded as that may do the force probes you may need.
December 20, 20241 yr Author Thank you for the response. I’m currently on my phone VPNing in. Here’s the file I just downloaded. tower-diagnostics-20241220-1759.zip
December 20, 20241 yr 47 minutes ago, bling_blong_blah said: I currently have the Beelink EQ14 running on a N150 CPU I'm not 100% sure because I can't find any viable information about this CPU nor the GPU, it isn't even listed on ark.intel.com If this is a Alder Lake-N CPU the iGPU should be supported by Unraid 7.0.0-rc.2 however I could be also be wrong about that and they bolted a new iGPU to a older CPU <- but I don't think that's the case. Please upgrade to Unraid 7.0.0-rc.2 and post Diagnostics again.
December 20, 20241 yr 11 minutes ago, ich777 said: I'm not 100% sure because I can't find any viable information about this CPU nor the GPU, it isn't even listed on ark.intel.com If this is a Alder Lake-N CPU the iGPU should be supported by Unraid 7.0.0-rc.2 however I could be also be wrong about that and they bolted a new iGPU to a older CPU <- but I don't think that's the case. Please upgrade to Unraid 7.0.0-rc.2 and post Diagnostics again. Hi @ich777 need 6.9+ lkddb pci 8086 46d4 .... .... 03.... : CONFIG_DRM_I915 : drivers/gpu/drm/i915/i915_pci.c # in 6.9–6.12, 6.13-rc+HEAD https://cateee.net/lkddb/web-lkddb/DRM_I915.html
December 20, 20241 yr 27 minutes ago, bling_blong_blah said: Thank you for the response. I’m currently on my phone VPNing in. Here’s the file I just downloaded. tower-diagnostics-20241220-1759.zip 78.21 kB · 2 downloads There is not an Unraid version which supports currently. 6.12 kernel is likely to be in 7.1 but not 7.
December 20, 20241 yr Author 1 minute ago, ich777 said: Please upgrade to Unraid 7.0.0-rc.2 and post Diagnostics again. Thank you. All done and here’s the new diagnostics. I have the GPU statistics installed and nothing has changed on that view. tower-diagnostics-20241220-1832.zip
December 20, 20241 yr Author Ok so I’ll likely need to wait for 7.1, that’s fine I guess. Upgrading to 7.0 has broken one of my USB devices I’m using for Home Assistant (Zigbee dongle) so I’ll need revert and wait for 7.1 anyway. I appreciate the help all. Thank you very much.
February 26, 20251 yr Hi all, I'm having some similar issues with the N150 specifically with the GPU detection. I'm unable to get hardware transcoding to work on Plex, etc. I'm currently running 7.0.1.
February 27, 20251 yr You will need to wait for 7.1, should be out next month, at least in beta/rc form.
March 25, 20251 yr Hi guys, I'm struggling with N150 board, I'm on unraid 7.1.0-beta.1, Quick Sync should work in this version, right? Cant get it to work with plex/ emby, I don't see option to enable hw decode in plex/ emby. my terminal output: my plex container config: my emby container config: please help me
March 25, 20251 yr 52 minutes ago, user96321 said: Hi guys, I'm struggling with N150 board, I'm on unraid 7.1.0-beta.1, Quick Sync should work in this version, right? Cant get it to work with plex/ emby, I don't see option to enable hw decode in plex/ emby. my terminal output: my plex container config: my emby container config: please help me What is the driver lspci -ls 0000:00:02.0
March 26, 20251 yr 50 minutes ago, user96321 said: np, this is what its outputing Its using the i915 driver rather than xe so should work ok. This is now it looks for JellyFin on my test server.
March 26, 20251 yr Ok, im bit confused, looks like it started to work all of sudden in JellyFin, if im reading it right. But still no luck with plex with same host device plex:
March 26, 20251 yr 36 minutes ago, user96321 said: Ok, im bit confused, looks like it started to work all of sudden in JellyFin, if im reading it right. But still no luck with plex with same host device plex: change plex to use /dev/dri/
March 26, 20251 yr 25 minutes ago, SimonF said: change plex to use /dev/dri/ Nope, still no option for hw in plex
March 26, 20251 yr 44 minutes ago, user96321 said: Nope, still no option for hw in plex Both name and path need to match
March 26, 20251 yr 40 minutes ago, SimonF said: Both name and path need to match no change even with matched name path
March 27, 20251 yr try removing the device mapping and adding it via the Extra Parameters "--device=/dev/dri:/dev/dri"
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.