March 29, 20251 yr Hi zusammen, wie finde ich raus, ob mein Mainboard Treiber benötigt ? Kann ich mit einem Befehl sehen das etwas fehlt ? Ich sehe das es unter App viele Treiber gibt, woher weis ich welcher der richtige für mein Board ist ? Über die Herstellerseite finde ich z.b nichts bezgl. Sensoren etc. Vielen Dank Jerome
March 29, 20251 yr 5 minutes ago, Mohrian said: Ich sehe das es unter App viele Treiber gibt, woher weis ich welcher der richtige für mein Board ist ? was für ein Gerät funktioniert denn nicht wofür du einen Treiber benötigen würdest ? wenn es um Sensoren geht (Temps, Fans), mal in die Konsole und den output fon <sensors> und sensors-detect> abbilden, dann kann man ggf. Vorschläge machen ob nuvo oder IT87 Treiber nötig wären ... Beispiel wenn es um die Netzwerkkarte geht, Realtek, passender Chipdatz wobei es meist gar keine Treiber benötigt ...
March 29, 20251 yr Author 14 minutes ago, alturismo said: sensors-detect root@Tower:~# sensors-detect # sensors-detect version 3.6.0 # Board: ASRock B365M Phantom Gaming 4 # Kernel: 6.6.78-Unraid x86_64 # Processor: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (6/158/13) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): yes Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): yes Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Nuvoton NCT6791D Super IO Sensors' Success! (address 0x290, driver `nct6775') Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): yes Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): yes Using driver `i2c-i801' for device 0000:00:1f.4: Kaby Lake (PCH) Module i2c-dev loaded successfully. Next adapter: SMBus I801 adapter at f040 (i2c-0) Do you want to scan it? (yes/NO/selectively): yes Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Next adapter: i915 gmbus dpc (i2c-1) Do you want to scan it? (yes/NO/selectively): yes Next adapter: i915 gmbus dpb (i2c-2) Do you want to scan it? (yes/NO/selectively): yes Next adapter: i915 gmbus dpd (i2c-3) Do you want to scan it? (yes/NO/selectively): yes Next adapter: AUX D/DDI D/PHY D (i2c-4) Do you want to scan it? (yes/NO/selectively): yes Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Driver `nct6775': * ISA bus, address 0x290 Chip `Nuvoton NCT6791D Super IO Sensors' (confidence: 9) Edited March 29, 20251 yr by alturismo etwas formatiert ...
March 29, 20251 yr 30 minutes ago, Mohrian said: 34 minutes ago, alturismo said: sensors-detect jetzt mal ernsthaft Frage zu "Treiber für was" ... nicht beantwortet. Ausgabe von <sensors> ... nicht gemacht. du wirst es herausfinden
March 29, 20251 yr Community Expert 6 hours ago, Mohrian said: wie finde ich raus, ob mein Mainboard Treiber benötigt ? Kann ich mit einem Befehl sehen das etwas fehlt ? Ich sehe das es unter App viele Treiber gibt, woher weis ich welcher der richtige für mein Board ist ? unraid entscheidet selber welcher Treiber von den vorhandenen ggf. erfordelrich ist. Erst, wenn etwas nicht funktioniert sollte man ggf. schauen ob man manuell Treiber nachladen muß. Normale Mainboards (ohne viel Schnickschnak) funktionieren mit den relevanten Teilen (CPU, RAM, Chipsatz, PCIe) out of the box. Erst wenn man eine spezielle Netzwerkkarte/-chip oder so einsetzt sind zusätzliche Treiber ggf. notwendig. Selbst die Lüftersteuerung eines Mainboards funktioniert durch das BIOS/UEFI selber so gut, wie der Hersteller es implementiert hat. Erst, wenn man manuell per Software da eingreifen/anzeigen will sind dafür ggf. Zusatztreiber erforderlich. Es bleibt also dabei, was alturimo schon angedeutet hat und ich hier etwas anders formuliere: if it ain't broke, don't try to fix it Wenn Du also kein Problem hast, versuche nicht etwas zu reparieren. Hast Du ein Problem, welches Treiber benötigt? 6 hours ago, Mohrian said: Über die Herstellerseite finde ich z.b nichts bezgl. Sensoren etc. Beschwerden über miserable Dokumentationen von Herstellern bitte beim Hersteller platzieren. Ansonsten: viele Chips auf einem Mainboard sind beschriftet. Mit den Typenbezeichnungen kann man schon mal suchen.
March 29, 20251 yr Author 6 hours ago, alturismo said: jetzt mal ernsthaft Frage zu "Treiber für was" ... nicht beantwortet. Ausgabe von <sensors> ... nicht gemacht. du wirst es herausfinden Doch war eigentlich alles an dem Text angehängt der hier von jemand bearbeitet wurde..... Treiber für Temperaturen. root@Tower:~# sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +35.0°C (high = +84.0°C, crit = +100.0°C) Core 0: +34.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +33.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +35.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +33.0°C (high = +84.0°C, crit = +100.0°C) Core 4: +36.0°C (high = +84.0°C, crit = +100.0°C) Core 5: +33.0°C (high = +84.0°C, crit = +100.0°C) nvme-pci-0500 Adapter: PCI adapter Composite: +38.9°C (low = -273.1°C, high = +69.8°C) (crit = +72.8°C) Sensor 1: +38.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +42.9°C (low = -273.1°C, high = +65261.8°C) nct6791-isa-0290 Adapter: ISA adapter Vcore: 312.00 mV (min = +0.00 V, max = +1.74 V) in1: 1.68 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM +3.3V: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM in6: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM 3VSB: 3.44 V (min = +0.00 V, max = +0.00 V) ALARM Vbat: 3.07 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM in10: 232.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM in12: 1.21 V (min = +0.00 V, max = +0.00 V) ALARM in13: 1.29 V (min = +0.00 V, max = +0.00 V) ALARM in14: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM Array Fan: 780 RPM (min = 0 RPM) Array Fan: 1103 RPM (min = 0 RPM) Array Fan: 786 RPM (min = 0 RPM) Array Fan: 786 RPM (min = 0 RPM) MB Temp: +37.0°C (high = +36.0°C, hyst = +35.0°C) ALARM sensor = thermistor CPU Temp: +32.0°C (high = +36.0°C, hyst = +35.0°C) sensor = thermistor AUXTIN0: +26.0°C sensor = thermistor AUXTIN1: +96.0°C sensor = thermistor AUXTIN2: +23.0°C sensor = thermistor AUXTIN3: +23.0°C sensor = thermistor PECI Agent 0: +34.5°C (high = +36.0°C, hyst = +35.0°C) (crit = +100.0°C) intrusion0: ALARM intrusion1: ALARM beep_enable: disabled nvme-pci-0300 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +72.8°C) Sensor 1: +33.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +40.9°C (low = -273.1°C, high = +65261.8°C)
March 29, 20251 yr Community Expert 40 minutes ago, Mohrian said: Treiber für Temperaturen. Ich sehe in Deinem langen Listing viele Temperaturen, Drehzahlen und Spannungen. und was fehlt Dir jetzt? Du weißt doch, wie Du das alles anzeigen kannst. WIllst Du all diese Angaben prominent im Dashboard sehen? dann wird es aber schnell sehr unübersichtlich und groß. Außer für Diagnosezwecke sind aktuelle auf die Kerne aufgeteilte Temperaturen nicht wirklich erforderlich. Und ob vielleicht die Spannungsangabe von "in12, 13, 14" jeweilis eine wirklich extrem wichtige Angabe ist, ohne deren ständige Anzeige unraid headless nicht auch betrieben werden kann, ist mir auch nicht so ganz klar.
March 29, 20251 yr 9 hours ago, Mohrian said: Doch war eigentlich alles an dem Text angehängt der hier von jemand bearbeitet wurde..... Treiber für Temperaturen. wenn ich mir die History hier ansehe ist da nichts, naja, egal jetzt. zum Rest hat @DataCollector ja bereits alles angemerkt, das plugin system temp ist auch installiert ?
March 30, 20251 yr Author 6 hours ago, alturismo said: wenn ich mir die History hier ansehe ist da nichts, naja, egal jetzt. zum Rest hat @DataCollector ja bereits alles angemerkt, das plugin system temp ist auch installiert ? Hi, komisch, evtl. war es zu lang Sorry tut mir leid. Ja aber manchmal ist nach einem Neustart die Temp weg, dann muss ich nochmal neustarten und es kommt wieder. Daher dachte ich es fehlt evtl. ein Treiber und er hat ein Thema. Da ich dann die beiden von dir vorgeschlagenen im App Store gefunden habe, wusste ich nicht welcher evtl. der richtige ist. Auch habe ich eine X520 SFP+ 10gbit Karte im Server, aber diese scheint von hause aus wohl zu gehen. Kenne mich da noch nicht so aus, daher die unsicherheit.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.