Hello,

 

I don't know how long I've had this problem, but as soon as I install the plugin I get an access error on my usb that loops around. This slows down my server and prevents me from accessing my disks.

 

Here is an example:

 

May  6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state
May  6 00:57:56 hostname kernel: veth[HASH]: renamed from eth0
May  6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state
May  6 00:57:56 hostname kernel: veth[HASH] (unregistering): left allmulticast mode
May  6 00:57:56 hostname kernel: veth[HASH] (unregistering): left promiscuous mode
May  6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state
[... similar virtual networking lines ...]

May  6 01:20:46 hostname plugin-manager: running: 'anonymous'
May  6 01:20:46 hostname plugin-manager: running: 'anonymous'
May  6 01:20:46 hostname plugin-manager: checking: /boot/config/plugins/dynamix.my.servers/node-linux-x64.tar.xz - SHA256
May  6 01:20:48 hostname plugin-manager: skipping: /boot/config/plugins/dynamix.my.servers/node-linux-x64.tar.xz already exists
May  6 01:20:48 hostname plugin-manager: checking: /boot/config/plugins/dynamix.my.servers/pnpm-linuxstatic-x64 - SHA256
[... similar plugin verification lines ...]

May  6 01:20:55 hostname root: Starting flash backup (if enabled)
May  6 01:20:55 hostname root: Starting Unraid API
May  6 01:20:55 hostname flash_backup: flash backup disabled, exiting
May  6 01:21:08 hostname plugin-manager: dynamix.unraid.net.plg installed
May  6 01:21:36 hostname kernel: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
May  6 01:21:42 hostname kernel: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
May  6 01:21:42 hostname kernel: usb 2-2: device not accepting address 2, error -62
[... similar USB error lines ...]
May  6 01:23:02 hostname kernel: usb usb2-port2: unable to enumerate USB device
May  6 01:25:33 hostname sshd-session[XXXX]: Connection from [IP_LOCAL] port [PORT] on [IP_SERVER] port [PORT] rdomain ""
May  6 01:25:33 hostname sshd-session[XXXX]: Accepted password for root from [IP_LOCAL] port [PORT] ssh2
[... SSH session logs omitted ...]
May  6 01:25:38 hostname elogind-daemon[XXXX]: Removed session 1.

 

 

The error appears as soon as I install the plugin and disappears when I uninstall it. I've changed my usb, thinking that was the problem, but nothing changes. The 2-2 usb port is used by my main usb key.

I'm having exactly the same issue (also on usb 2-2 port)

Please post the output from

lsusb -vt

4 hours ago, JorgeB said:

Please post the output from

lsusb -vt

root@hostname~:# lsusb -vt
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/16p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 002: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        ID 1462:7d42 Micro Star International 
    |__ Port 003: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0610 Genesys Logic, Inc. Hub
        |__ Port 004: Dev 005, If 0, Class=Mass Storage, Driver=usb-storage, 480M
            ID 0781:5567 SanDisk Corp. Cruzer Blade
    |__ Port 011: Dev 004, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0608 Genesys Logic, Inc. Hub
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/9p, 20000M/x2
    ID 1d6b:0003 Linux Foundation 3.0 root hub

 

 

I thought my usb was plugged into port 2-2, but I don't have a usb on port ‘2-2’?

 

Originally, my usb was plugged into a 3.0 port when I got the error, so I moved my usb to a 2.0 port, but the error is still there if the plugin is installed.

Edited May 7, 20251 yr by Hoder

+1 having the same usb 2-2 port issue here. It significantly slowed down the web UI.

 

I tried moving my usb drive (which is the only usb device connected to the server) to another 2.0 port but it didn't fix the issue.

After reading this post, I uninstalled Unraid Connect and the issue disappeared.
I didn't change the usb drive.

23 minutes ago, maloja said:

+1 having the same usb 2-2 port issue here. It significantly slowed down the web UI.

 

I tried moving my usb drive (which is the only usb device connected to the server) to another 2.0 port but it didn't fix the issue.

After reading this post, I uninstalled Unraid Connect and the issue disappeared.
I didn't change the usb drive.

 

17 hours ago, Snekoverload said:

I'm having exactly the same issue (also on usb 2-2 port)

Thank you for your feedback. I thought I was the only one ahah

 

Just to add some information, if I add these parameters to my syslinux config ‘usbcore.autosuspend=-1 usb.use_lpm=0’, the error disappears but the slowdowns are still there.

2 hours ago, Hoder said:

ID 1462:7d42 Micro Star International 

This is the MSI RGB control, see here:

 

 

2 minutes ago, JorgeB said:

This is the MSI RGB control, see here:

 

 

Oh, thank you for your reply. I hadn't seen this post, but I looked for it (badly, in fact).

 

I'll take a closer look.

On 5/7/2025 at 4:16 PM, JorgeB said:

This is the MSI RGB control, see here:

 

 

Hello,

I've looked at the thread you gave, but it doesn't provide a definitive solution.
I've tried creating an udev rule, but that doesn't solve the plugin problem.

Do you have any information on what the plugin does? 
Or a way to tell the plugin to ignore this port?

Not yet, but I've reported the issue to LT, so hopefully a solution will be found soon, I'll post any updates on this thread.

Hello @JorgeB ,

No news on a possible solution to the problem? Or even a lead?

Sorry, don't have any news so far other than it's being investigated.

Has anyone tested the latest plugin release? This issue may be resolved there.

On 7/14/2025 at 5:23 PM, JorgeB said:

Has anyone tested the latest plugin release? This issue may be resolved there.

Hello,

Thanks for your feedback, the problem seems to have been solved. I'm going to continue testing on my own.

Awesome! I am happy to hear it. Please let us know if you see any repeated behaviors.