I recently updated to 7.0.1 and shortly after ended up having to replace two drives; another two are also showing errors, and I'm going to replace them soon. I noticed yesterday that some media will not play on Plex. I peeked into Krusader, and the shares were empty. Some media would still play, though. After looking at the shares in Unraid, almost all of them show empty, but my drives are all full of data. The parities rebuilt normally and successfully. I'm not sure how to get it to report the data correctly.

coldheart-diagnostics-20250826-1442.zip

Diagnostics shows all shares have data.

What do you get from command line with this?

ls -lah /mnt

2 hours ago, learned-sporophyte6562 said:

I peeked into Krusader

I would recommend using the Dynamix File Manager bult into Unraid 7 for this sort of issue as it bypasses the docker mapping level so is more likely to be accurate.

The built-in one shows it empty too. Navigating with Windows shows it empty...

Do the shares (folders) show up if you look directly at the drives from the Main page rather than going via the Shares page?

It could be worth running a check filesystem on you drives as file system level corruption has been known to cause this type of issue. In particular the diagnostics suggest that disk7 has file system level corruption that needs fixing.

Maybe some permissions are wrong, which is why I asked

23 hours ago, trurl said:

What do you get from command line with this?

ls -lah /mnt

I would think it is the file system corruption on disk7 that is stopping the User Shares showing up correctly.

23 hours ago, itimpi said:

Do the shares (folders) show up if you look directly at the drives from the Main page rather than going via the Shares page?

It could be worth running a check filesystem on you drives as file system level corruption has been known to cause this type of issue. In particular the diagnostics suggest that disk7 has file system level corruption that needs fixing.

That worked, thanks!