March 11Mar 11 I added some further drives to my Unraid server taking the total up to 14 Sata HDDs (88TB) - connected via LSI card and Sas expander and onboard SATA ports however when I try to connect the 14th drive via sas expander or onboard sata port the bios and neither Unraid sees it. Ive used the same power cable running my other drives to see if that was the problem but still nothing so I changed the sata cable to one Im using and still no joy - ANY HELP on what could be the reason drive 14 is not being seen by the BIOS / Unraid?Motherboard ROG MAXIMUS X HERO (WI-FI AC) - with i7 8700k and 16GB DDR4 Edited March 11Mar 11 by UnraidVirgin
March 12Mar 12 Does it work in the onboard SATA port or a different PC? Also make sure to test with a Molex to SATA adapter to rule out the 3.3v issue.
March 12Mar 12 Author 14 hours ago, JorgeB said:Does it work in the onboard SATA port or a different PC? Also make sure to test with a Molex to SATA adapter to rule out the 3.3v issue.i have tried every port on the motherboard and on the sas expander and it simply does not see it - I even plug out one of the drives in the array and replace it with the new drive and it does not see it - when i plug the same drive into a USB enclosure and connect to my Mac it sees it straight away! What on earth is going on?
March 12Mar 12 8 minutes ago, UnraidVirgin said:What on earth is going on?have you14 hours ago, JorgeB said:test with a Molex to SATA adapter to rule out the 3.3v issue?
March 12Mar 12 Author 28 minutes ago, ChatNoir said:have you?I just looked it up on youtube and it MUST be that! I will try first thing tomorrow with a piece of electrical tape over the 3rd pin!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.