July 11Jul 11 After upgrading to 7.3.2 I get the following in my syslog after starting a random docker container. Always on a different core.Jul 11 11:13:52 BB-8 kernel: Code: Unable to access opcode bytes at 0xffffffffffffffd6.Jul 11 11:13:53 BB-8 kernel: f3d[523426]: segfault at 0 ip 0000000000000000 sp 00007fff11489048 error 14 likely on CPU 8 (core 16, socket 0)This boot is is my manyfold container, but next boot it will probably be a different container. I normally have two parity drives, but I'm in the process of consolidating as much data as possible onto as few drives as possible so I can hopefully spin some drives down, so I have parity disabled right now. Error occurs with parity enabled as well. I am on the newest BIOS for my motherboard (ASUS Pro WS W680-ACE IPMI with an i7-12700k). The only change I made was updating. Could it be something in the 7.3.2 upgrade that doesn't like the E cores on my CPU?bb-8-diagnostics-20260711-1120.zip Edited July 12Jul 12 by shaunmccloud
July 12Jul 12 Community Expert Jul 11 11:20:45 BB-8 kernel: f3d[566297]: segfault at 0 ip 0000000000000000 sp 00007ffc169c3668 error 14 likely on CPU 8 (core 16, socket 0)Jul 11 11:20:45 BB-8 kernel: Code: Unable to access opcode bytes at 0xffffffffffffffd6.Jul 11 11:20:46 BB-8 kernel: f3d[566326]: segfault at 0 ip 0000000000000000 sp 00007ffeb7e331f8 error 14 likely on CPU 8 (core 16, socket 0)Jul 11 11:20:46 BB-8 kernel: Code: Unable to access opcode bytes at 0xffffffffffffffd6.This app keeps segfaulting, do you know what "f3d" is?
July 12Jul 12 Author I do not, but after checking Redis & MariaDB I found an issue in the database. I backed up all the 3D models (its a personal repository for items I 3D print), then cleared out the database. Set it up again and all is good. I'm guessing a couple of weeks ago when we had a power blip it caused the issue and it didn't manifest until I did the upgrade until 7.3.2, therefore the upgrade was just a red herring.....I really need to get a new UPS.
July 12Jul 12 Community Expert 48 minutes ago, shaunmccloud said:I really need to get a new UPS.You might only need a new battery. Inexpensive replacement batteries are available for most UPS models.
July 12Jul 12 Author 3 minutes ago, Frank1940 said:You might only need a new battery. Inexpensive replacement batteries are available for most UPS models.Nope, it is beyond a new battery. Something is wrong in the control board. Its an ancient APC and the last battery replacement only lasted a year before they went bad from over charging :(
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.