ctviggen Posted June 26, 2012 Share Posted June 26, 2012 Should I be worried about the drive not reporting temperature? It ran through preclear with no problems. Thank you. PS -- I wanted to test an SSD as a cache drive just to see the kind of data rate it would provide. If it's not much of an increase in speed (or I'm always writing more in one day than 128GB), I'll use the SSD elsewhere. Link to comment
BetaQuasi Posted June 26, 2012 Share Posted June 26, 2012 I use an SSD as cache as well, it doesn't report temp. I'm not sure it really needs to as they don't really generate much heat. Link to comment
ctviggen Posted June 27, 2012 Author Share Posted June 27, 2012 Great, thank you very much. Link to comment
c3 Posted June 28, 2012 Share Posted June 28, 2012 Consumer SSDs do not include a temperature sensor, even those with a place on the PCB http://www.tomshardware.com/forum/277322-32-degrees Enterprise SSDs have very accurate temp sensors http://www.techpowerup.com/164477/IDT-Introduces-Low-power-High-accuracy-Temperature-Sensor-for-Solid-State-Drives.html At $1.25 for the part, you can see why it is left off... Link to comment
bonzi Posted June 29, 2012 Share Posted June 29, 2012 Should I be worried about the drive not reporting temperature? It ran through preclear with no problems. I don't think you should/need to preclear a SSD. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.