Was: Re: Positive feedback on performance (RC6-test2)


Recommended Posts

I think I can exclude a cable causing the issues. I swapped the drive to a different bay (I'm using Supermicro's CSE-M35 enclosures), and that doesn't help either.

 

Here is a log file:

 

https://dl.dropbox.com/u/7782292/log.rtf

 

It was recorded during two buffering events. However, during the time the buffering happened no entries were made in the log. In other words, the buffering occurred in the 5 minutes after the last log entry.

 

As mentioned before, during that time I observed high %wa values, and it seems to happen when the movie file is opened for the first time after a reboot. The 2nd try to play the same movie from the beginning works without buffering, and %wa stays low.

 

I will also generate a smart-report in the next hours.

 

Thanks for your help,

 

Chris

Link to comment

... and I have to add:

 

Yesterday I configured the LAN as 100Mb in order to see if the buffering is influenced by that. I had the feeling that I see it less frequently, but it's still there.

 

Anyhow, I looked for dropped packets this morning. I used the server quite a bit yesterday, so this log is based on more network traffic:

 

root@Neon:~# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:30:48:b2:0f:e6 

          inet addr:192.168.1.120  Bcast:192.168.1.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:8051675 errors:0 dropped:27 overruns:0 frame:0

          TX packets:15119121 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:572095857 (545.5 MiB)  TX bytes:4000581494 (3.7 GiB)

          Interrupt:43 Base address:0x8000

 

27 dropped packets. I guess in 1000Mb moder the rate would have been even higher, wouldn't it?

 

Chris

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.