slarco Posted December 31, 2014 Share Posted December 31, 2014 Hi, I'm back here because I have a problem with my Unraid. I got my server up and running a long time ago. I have all macs and everything wired using a router. The server with static IP 192.168.1.10. I lend over the server to a friend and got it back after a year and a half In that time i change my mac and now i guess i lost the config to make it work with the server and i can't access the web guy or telnet. I cheated the usb flash, still have the same static IP. I'm not very good at this, took me a lot of time and post to make it run the first time. Does anyone have any idea where can i start ? I have around 12 Tb info on the server that i would like to re-organize and clean up after i review it. ALso, used to have the plugging to start once turned on but i think that is disabled now, i can't really remember after almost 2 years. Thanks a lot Quote Link to comment
trurl Posted December 31, 2014 Share Posted December 31, 2014 Attach a monitor and keyboard so you can make sure it is booting correctly. If it is, then you probably have some networking issue. Is unRAID on the same subnet as your MAC? Quote Link to comment
slarco Posted January 1, 2015 Author Share Posted January 1, 2015 Yeah. They are both under the same network. Attached to the same router. I will get a monitor and a keyboard to check if it's all booting ok. I'll get back when i have some results and syslogs. Thx Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.