July 26, 201510 yr OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported?
July 26, 201510 yr OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported? Not supported at this time
July 26, 201510 yr Author OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported? Not supported at this time My subtle way of requesting it to be supported.
February 29, 20206 yr You should also be able to change it per drive by going to MAIN then clicking the drive and changing the values Click Disk Change Value Edited February 29, 20206 yr by MajorArchitect
February 29, 20206 yr @MajorArchitect, did you happen to notice the thread you are responding to is almost 5 years old, and the solution has been in place for a while.
February 29, 20206 yr @jonathanm Yes. This was the first to pop up on google for me though. After posting here I saw the new thread and posted there as well. I wanted to make sure people can find a solution. I've had unRaid since 2016 but I'm new to posting on the forms, so I'm open to advice. Thanks!
Archived
This topic is now archived and is closed to further replies.