December 29, 201510 yr Hi, I noticed on the dashboard page, I see two of my hard drives have yellow warning sign on SMART status. I did smart short self-test and they both completed without error. Do I need to worry about anything? I hope someone can help me with this. Disk 2: Western Digital Red [4TB] highlighted on #5 Reallocated sector count ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 182 051 Pre-fail Always - 483 3 Spin_Up_Time 0x0027 182 182 021 Pre-fail Always - 7875 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 297 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 94 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4506 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 711 194 Temperature_Celsius 0x0022 129 113 000 Old_age Always - 23 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Disk 3: Seagate Barracuda 7200.11 [1.50TB] highlighted on #5 Reallocated sector count and #188 Command timeout ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 62858346 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 4041 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 157 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 56202053 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31801 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 12 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 675 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 274882101314 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 236 190 Airflow_Temperature_Cel 0x0022 075 046 045 Old_age Always - 25 (Min/Max 17/28) 194 Temperature_Celsius 0x0022 025 054 000 Old_age Always - 25 (0 14 0 0 0) 195 Hardware_ECC_Recovered 0x001a 047 026 000 Old_age Always - 62858346 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 12356
December 30, 201510 yr Reallocated sectors are bad as are Current Pending Sector Reallocated. Keep an eye on those values to see if they change. If they increase at all, it's a sign the drive is on it's way out. The only drives I trust with my data are those with 0 reallocated sectors and 0 current pending sector reallocated. Only on Seagate drives you can mostly ignore the Command Timeout raw value.
December 30, 201510 yr Community Expert http://lime-technology.com/forum/index.php?topic=44886.0 There's an option to acknowledge current SMART status and only warn again if values increase.
December 31, 201510 yr Author http://lime-technology.com/forum/index.php?topic=44886.0 There's an option to acknowledge current SMART status and only warn again if values increase. Thanks I'll look into it.
Archived
This topic is now archived and is closed to further replies.