Zonediver Posted March 14, 2016 Share Posted March 14, 2016 Hi Folks, i plan to rearange my arry and replace 2x 1,5TB HDD with one 3TB HDD. I found this: https://lime-technology.com/wiki/index.php/Shrink_array but this article told me, its not updated for v6. So i am a little bit confused. Can i use this procedure or is there a different way to safly remove a drive from the arry? Thanks in advance Quote Link to comment
JorgeB Posted March 14, 2016 Share Posted March 14, 2016 Procedure is the same, in your case it’s probably easier to upgrade one of the 1.5TB disks (the one with more data) to the 3TB, after the upgrade is done copy all data from the other 1.5TB disk and then remove it. Quote Link to comment
trurl Posted March 14, 2016 Share Posted March 14, 2016 Replacing Multiple Data Drives with a Single Larger Drive Quote Link to comment
Zonediver Posted March 15, 2016 Author Share Posted March 15, 2016 Ah ok - thanks for your hints and the Link - will do it in this way Quote Link to comment
ysss Posted June 24, 2016 Share Posted June 24, 2016 Hi guys, Will the 'new config' clear up any other settings, other than the disk assignments + voiding parity? I worry about my users list, shares settings, dockers settings and also cache disk settings/assignments. Thanks Quote Link to comment
trurl Posted June 24, 2016 Share Posted June 24, 2016 Hi guys, Will the 'new config' clear up any other settings, other than the disk assignments + voiding parity? I worry about my users list, shares settings, dockers settings and also cache disk settings/assignments. Thanks no Quote Link to comment
JorgeB Posted June 24, 2016 Share Posted June 24, 2016 ...also cache disk settings/assignments. You won't lose the cache settings but cache disk(s) will have to be reassigned. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.