6.2.1 - Can't install Windows on a VM

[Blud]

Hi everyone,

I try to create a Windows 10 VM, but it fails at the beginning of the installation.

 

I try 3 versions. It's always a BSOD and there is different errors :

- with windows 10 entreprise : WppRecorder.sys (0xc0000098)

- with windows 10 education : PAGE_FAULT_IN_NONPAGE_AREA Winfsf.sys

- with windows server 2012 : BSOD without any message

 

I tried different configuration during the VM creating process (HHD auto or manual, VNC or GPU passthrough, RAM size...).

I fallow theses videos : Configuring your BIOS, Initial Setup, Disk and User Shares, Enabling VM Management and Installing a Windows VM.

I also tried these configuration (I got only 2 disk) : 1 disk for parity, 1 disk on array OR 1 disk on array and 1 disk on cache.

I tried to use the Find Common Problems plugin but there is no errors.

 

My two disks are SSD, have you seen similar error with SSD ?

Or have you seen theses errors in a particular configuration ?

 

Just for info, i'm on a remote server so I can't change the hardware configuration.

 

Files attached :

- diagnostic

- XML of my VM

- Hardware configuration of my server

 

Thanks a lot !

 

Diag.zip

[kode54]

Have you tried limiting the VM to exactly one CPU core/thread on cpu 0, only for the duration of the install?

[CrashnBrn]

Have you run a memtest?

[Blud]

Hi guys,

Thanks for your help.

 

Have you tried limiting the VM to exactly one CPU core/thread on cpu 0, only for the duration of the install?

 

I tried with one CPU on cpu 0 and it's the same result...

 

Have you run a memtest?

 

I run a memtest yesterday and no errors..

 

 

Any other ideas ?

 

[Blud]

Up 

[itimpi]

Have you tried using SeaBIOS rather than OVMF?

[Blud]

Have you tried using SeaBIOS rather than OVMF?

 

Hi itimpi, thanks for your help.

 

I just tried to set BIOS to SeaBIOS but it changes nothing...

 

I tried :

- OVMF with i440fx-2.5

- OVMF with q35-2.5

- SeaBIOS with i440fx-2.5

- SeaBIOS with q35-2.5

[matt_webb]

I found changing the install iso to a usb drive helps.  Not sure is this would help this problem though.

 

Sent from my SM-N920I using Tapatalk

 

 

[Blud]

I found changing the install iso to a usb drive helps.  Not sure is this would help this problem though.

 

Hi,

Thanks for your help.

 

What do you mean by "changing the install iso to a usb drive" ?

[matt_webb]

I found changing the install iso to a usb drive helps.  Not sure is this would help this problem though.

 

Hi,

Thanks for your help.

 

What do you mean by "changing the install iso to a usb drive" ?

Go to the VM settings, switch to advanced view.

 

Set:

OS Install ISO: - ISO of Win CD

OS Install CDRom Bus: Choose "USB"

 

Cheers,

Matt.

 

Sent from my SM-N920I using Tapatalk

 

 

[Blud]

I tried and it didn't change anything.

 

Thanks anyway