htpcguru Posted February 18, 2017 Share Posted February 18, 2017 After converting all the data disks from Reiserfs to XFS, one of the disks exhibits Sync Errors and Pending Sector Counts. Please see screenshots. I do have another 2TB disk (from the Reiserfs conversion process) that I can use to try swapping this out. What would be the correct troubleshoot procedure? Quote Link to comment
JorgeB Posted February 18, 2017 Share Posted February 18, 2017 Those are not sync errors, they are read errors, also always post the diagnostics but based on the SMART info replace it ASAP. Quote Link to comment
htpcguru Posted February 18, 2017 Author Share Posted February 18, 2017 Those are not sync errors, they are read errors, also always post the diagnostics but based on the SMART info replace it ASAP. Yes log shows a tonne of read errors. Diagnostics attached. Pre-clearing the spare 2TB now. Quote Link to comment
JorgeB Posted February 18, 2017 Share Posted February 18, 2017 Since you were running a correcting check parity was incorrectly updated due to some of the read errors, there will be some corrupt file(s) on the rebuilt disk, but not much you can do now unless you have checksums for all files. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.