Running a windows 10 VM had a complete system crash.

Unraid starts but Array wont.

Added system log.

 

 

bequiet-diagnostics-20170701-1554.zip

By array won't start do you mean that the GUI hangs after clicking the start array button?

Yes

 

Probably the same as this thread posted one hour ago, follow the same advice:

 

 

Yes

 

Yeah I have that problem before, but cant find anything wrong with my disks

Then grab and post the diags after array start .

Unsure if this is what you need. I started the array under maintaince mode

bequiet-diagnostics-20170701-1741.zip

3 minutes ago, BullDog656 said:

Unsure if this is what you need

 

No, I need you to do the same as in the thread I linked above:

 

Quote

grab the diagnostics on the console/ssh after starting the array by typing diagnostics

 

In normal mode, maintenance mode doesn't help.

K try this, took me a bit to figure out where the logs were going to put.

bequiet-diagnostics-20170701-1829.zip

Thanks so much for your time johnnie.black.

I spent some time looking at the log and I did see a system file problem with md1.

I ran the solution you suggested and all is well again.

 

Thanks again