Kolmain Posted July 21, 2017 Share Posted July 21, 2017 So I found 1 post mentioning the 2760 and another using it, but I've got two here and I can't get them to see my disks in unRAID. It sees them at boot and shows their status, but when I boot into unRAID all of my disks for my existing array are not there and not accessible. Am I missing something that I need to do in order to migrate from my existing HBAs to the 2760? Link to comment
JorgeB Posted July 21, 2017 Share Posted July 21, 2017 Diagnostics may shed some light on the problem, the only user I know with one is@Pauven, not sure if some initial config is needed to get it working but don't think so. Link to comment
Kolmain Posted July 21, 2017 Author Share Posted July 21, 2017 What diagnostics should I run? Hopefully @Pauven can shed some light on how he got his working. Theres nothing special I need to do when changing out HBAs for an existing unRAID install right? Link to comment
JorgeB Posted July 21, 2017 Share Posted July 21, 2017 Just now, Kolmain said: What diagnostics should I run? Tools -> Diagnostics 1 minute ago, Kolmain said: Theres nothing special I need to do when changing out HBAs for an existing unRAID install right? Not usually as long as it an HBA and not a RAID controller (or a controller in RAID mode). Link to comment
Kolmain Posted July 21, 2017 Author Share Posted July 21, 2017 Ah- I reverted back to my HBA's since its running my Plex server. Anyone know if there is a special procedure to enable JBOD mode? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.