numpkin Posted October 30, 2017 Share Posted October 30, 2017 Hi folks, Following on from my previous post:- Both the Parity drives are showing "Disabled" but the Data and cache disks are showing good see attached pics before and after .... Also the after pic say that "All Data on this disk will be erased when the array is started", when I start the array it does nothing .... Is it a matter of UN-attaching the disks, shutting down, reboot then re-attaching? also Diagnostics and syslog attached Regards --- Numpkin unraid_tower-01-diagnostics-20171030-1105.zip unraid_tower-01-syslog-20171030-1103.zip Quote Link to comment
JorgeB Posted October 30, 2017 Share Posted October 30, 2017 You need to re-enable both parity disks or if you they are mostly valid do a new config and trust parity, then do a parity check Quote Link to comment
numpkin Posted October 31, 2017 Author Share Posted October 31, 2017 Hi folks Just a quick update:- First thanks johnnie.black for your reply ...... I went the with stop array, unassigned both parity disks, start array (only data disks showing), stop the array, reassign both parity disks, start the array, after about 12 hours of rebuild the array and parity disks now show all green ..... Regards --- numpkin Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.