March 18, 20188 yr I was running 6.5.0 on a X9CSM motherboard with a E3 1220 V1 CPU, and all was OK. I have just replaced the CPU with a E3 1230v2, and have checked that I am running V2 BIOS The motherboard reports the CPU data OK, but on UnRaid the overall and per core CPU usage is now not being reported. On the previous CPU, the array used to boot straight into Array Started status, with the new CPU there is now a small delay whilst UnRaid reports Mounting Disks and Starting Services? Edited March 18, 20188 yr by clevoir
March 18, 20188 yr Community Expert Two things. First, if you have installed any type of popup or adblocker that you 'whitelist' your unRAID server. Second, what browser are you using? Is it the latest version? If possible, try another browser. (There was some issues a while back with this problem and they were browser related.)
March 18, 20188 yr Author I use Firefox and it worked OK just before I changed CPU, I haven't installed any popup or ad blockers recently either. I have just tried Chrome and have the same issue? PS I have just noticed that it is the same on my Backup array, using both Firefox and Chrome, it is running 6.5.0 too So clearly not related to the CPU change, perhaps a 6.5.0 issue? Edited March 18, 20188 yr by clevoir
March 19, 20188 yr I had the same problem on 6.5 rc series and 6.5.0 stable. Tried with Chrome, Firefox and Safari. Same result every time. Rolled back to 6.4.1 and display is ok again. Kevin
March 19, 20188 yr Tested Chrome, Firefox, Edge, Safari and Brave. They all work fine. Have no clue what is causing your issue.
March 19, 20188 yr @bonienl This comment posted right after 6.5.0 install. Includes Diagnostics. Kevin. https://lime-technology.com/forums/topic/70095-unraid-os-version-650-stable-release-available/?tab=comments#comment-641893
April 21, 20188 yr Whitelist your server in your AV. Its likely the AV closing the required websockets that were recently implemented causing CPU stats to not display.
March 27, 20215 yr Hey, I know its an old post but I had the same issue while accessing Unraid over my "Nginx Proxy Manager" (Reverse Proxy). You have to enable "Websockets Support" to see your CPU stats while accesing the server external. Hope that helps those who found that post over google Have a good 1
Archived
This topic is now archived and is closed to further replies.