Problems to detect all HDDs/SSD

[Leonardo Takahata]

Hello. I'm not a unRAID specialist... this is my first time with, and I really need a help from the community to fix this issue.

I checked the forum, only the following topic have something, but didn't help me:

 

https://lime-technology.com/forums/topic/18959-script-to-enable-sata-controllers-without-kernel-modification/

 

The problem is:

 

My mini ITX mobo I have, has 2 SATA 3.0, where I connected 2 HDD of 2Tb to be used as "disks"

I'm using a PCI Express Expansion Board with 2 SATA 3.0 slots, where one is used to 1 HDD of 2TB "parity", and, one SSD of 240Gb as "cache"

 

The PCI Express Expansion Board is based on ASMedia ASM1061.
My mobo: http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=711

 

The problem is: I can't see the "parity" HDD and the "cache" SSD...

 

Please help me to out the unRAID to work...

[JorgeB]

Please post your diagnostics: Tools -> Diagnostics

[Leonardo Takahata]

Hello johnnie.black, many, many thanks for the reply.

 

Attached the file you requested

 

Leo

l3k-cloud-diagnostics-20180603-0451.zip

[JorgeB]

The Asmedia 106X is plug'n and play with unRAID, no modification necessary, your log shows problems identifying both disks on that controller:

 

Jun  3 04:47:02 L3K-CLOUD kernel: ata3.00: device reported invalid CHS sector 0
...
Jun  3 04:47:02 L3K-CLOUD kernel: ata4.00: device reported invalid CHS sector 0

 

Either there's a problem with the controller or some other compatibly issue, since it's a mini ITX board there's no other slot you could try, so not much you can do, look for a bios update, if there isn't one or it doesn't help you'll need to try a different controller.

[Leonardo Takahata]

Johnnie...

 

I'll try a different controller,

 

Thanks!

 

[JorgeB]

I forgot to mention, if you installed the AHCI script remove it as it can cause problems.

[Leonardo Takahata]

Nice, thanks to remember.

 

I remove it.

 

Greetings from Brazil!