Array does not spin down after upgrade from 6.4.1

[majorspawn]

Gents,

 

My array doesn't spin down as expected after 15 minutes if I upgrade from 6.4.1, I had this problem previously so I reverted back to 6.4.1, tonight I attempted to once again upgrade to new release 6.5.3 and the same problem occurs.

As far as I can see no one is accessing the shares, no activity on the disks, no VMs, only 1 active docker MariaDB which is not being used either. If I spin down the array manually the disks dont spin up again and stay powered down.

 

Any suggestions or advice in where to start troubleshooting this?

 

I have copied the info from the log section

 

Thanks in advance

 

log.txt

[Squid]

9 hours ago, majorspawn said:

Any suggestions or advice in where to start troubleshooting this?

Diagnostics zip file instead of simply the log

[majorspawn]

Hi Gents,

 

Ive updated to 6.5.3 again, the disks went to sleep after 30 minutes or so, will keep an eye out on this and if it stops spinning down to default 15 mins ill attach diagnostics.

 

stand by..

[Frank1940]

Go to   Settings   >>>   Disk Settings   and tell  us what the value for the   "Tunable (poll_attributes):" is set to.  I seem to recall that this parameter also controls how often the disks are polled to determine their status.  

[majorspawn]

1 hour ago, Frank1940 said:

Go to   Settings   >>>   Disk Settings   and tell  us what the value for the   "Tunable (poll_attributes):" is set to.  I seem to recall that this parameter also controls how often the disks are polled to determine their status.  

Hi Frank, its set to 1800

[Frank1940]

Try setting it to 60  (that would be 60 seconds between polls).  As I recall, that will update the Spun-up/Spun-down icon every sixty seconds rather than every thirty minutes.  (Don't do this if you have a slow CPU or have any processes running that need a lot of real time responsiveness. ) 

[majorspawn]

9 hours ago, Frank1940 said:

Go to   Settings   >>>   Disk Settings   and tell  us what the value for the   "Tunable (poll_attributes):" is set to.  I seem tecall that this parameter also controls how often the disks are polled to determine their status.  

 

6 hours ago, Frank1940 said:

Try setting it to 60  (that would be 60 seconds between polls).  As I recall, that will update the Spun-up/Spun-down icon every sixty seconds rather than every thirty minutes.  (Don't do this if you have a slow CPU or have any processes running that need a lot of real time responsiveness. ) 

Quote

 

I'll try 900 which is 15 minutes?, 30 mins poll might be the issue with icons only..