casperse Posted January 12, 2019 Share Posted January 12, 2019 Hi All I bought the "Servercase UK SC-4324S = Norco RPC-4224 4U" and it have the 3 fan Wall and a power connector. BUT on the side of the power connector there is some pins (See picture) Better see it here: What are they used for? It will be pretty hard to get to them when I have mounted it and the MB....(Impossible) Hope someone can clear this up for me Thanks Casperse Quote Link to comment
smeep2k4 Posted March 12, 2019 Share Posted March 12, 2019 I have this case, but there are absolutely no instructions provided, so I can't give you a definitive answer. My guess is that they're fan control header pins. Since there's 6, there would be 2 per fan that you'd connect to the motherboard. Quote Link to comment
makkish Posted October 16, 2020 Share Posted October 16, 2020 Hello, Sorry to revive this old thread, but did you (or someone else) ever resolve this? Quote Link to comment
includenull Posted December 3, 2020 Share Posted December 3, 2020 (edited) I bought this case (SC-4324) from AliBaba (I assume from the OEM) and it came with a cable attached to this header. It seems to be a custom cable that goes to three fan plugs probably for PWM control, with power being delivered via the 4-pin molex. Photos attached, you could likely make your own cable if you have the parts or by splicing a USB header cable with 3 PWW fan cables. Edited December 3, 2020 by includenull smaller thumbnails Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.