Maticks Posted March 19, 2019 Share Posted March 19, 2019 Can anyone help with Unraid on ESXi 6.7. I have no working network driver after booting 6.6.7 of Unraid off a USB. i've tried E1000, VMXNET3 was the first i tried neither worked. When i boot up Ubuntu it works no issues I can't really flash the USB with an older version now its sitting in a server within the DC. Any thoughts? Quote Link to comment
uldise Posted March 19, 2019 Share Posted March 19, 2019 (edited) boot up unraid VM, open console, login and type diagnostics. it will collect diagnostics and put them on your flash drive. attach it to the forum. and first try it with VMXNET3. my initial guess - unraid by default is configured not on eth1 but on bond?, diags will tell it.. Edited March 19, 2019 by uldise Quote Link to comment
Maticks Posted March 19, 2019 Author Share Posted March 19, 2019 yeah it is on br0. Kind of impossible to get the diagnostics given the server is a long way away. I have been unable to get eth1 to appear. Quote Link to comment
Maticks Posted March 19, 2019 Author Share Posted March 19, 2019 is there some CLI commands or config i can change to get it out of bonded and back to the interface directly ? Quote Link to comment
uldise Posted March 19, 2019 Share Posted March 19, 2019 (edited) i think it should be in /boot/config/network.cfg what the output of ifconfig? Edited March 19, 2019 by uldise Quote Link to comment
Maticks Posted March 20, 2019 Author Share Posted March 20, 2019 (edited) when i put config in network.cfg and reboot nothing seems to change. ifconfig shows only br0 and lo I cannot see any Ethernet Controllers in dmesg. Maybe previous versions of unraid had a driver that is no longer in the current build Edited March 20, 2019 by Maticks Quote Link to comment
uldise Posted March 20, 2019 Share Posted March 20, 2019 try this? one of my unraid VMs is on version 6.6.6, and working just fine with VMXnet3 driver. just in case, are you added virtual network adapter to unraid VM? post a screenshot.. Quote Link to comment
N4TH4N Posted July 20, 2019 Share Posted July 20, 2019 On 3/20/2019 at 10:15 AM, Maticks said: when i put config in network.cfg and reboot nothing seems to change. ifconfig shows only br0 and lo I cannot see any Ethernet Controllers in dmesg. Maybe previous versions of unraid had a driver that is no longer in the current build @Maticks did you get networking working on 6.7.2 in ESXi ? I'm having the same issue. Older versions work fine. Quote Link to comment
Maticks Posted July 23, 2019 Author Share Posted July 23, 2019 yeah i did, i downloaded 6.7.2 which seem to be a lot better with the E1000 driver in ESXi and boom it just worked. you do have to kill bonding though in /boot/config/network.cfg and change it to No then reboot and it works. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.