Woodpusherghd Posted April 30, 2019 Share Posted April 30, 2019 (edited) I attempted to replace a 1TB data drive with a 2TB WD Blue drive. Following the wiki, I stopped the array, unassigned the 1TB drive, powered down, replaced the drive with the 2TB, powered up the unRaid box, stopped the array but the 2 TB drive wasn't recognized. I removed the drive and it was recognized in my Windows PC. Tried again, same result. I once again tried the drive in my Windows PC but this time I formatted it. Now it was recognized in unRaid. Is this normal? BTW, I'm running unRaid 6.70 rc7. Edited April 30, 2019 by Woodpusherghd Quote Link to comment
JorgeB Posted April 30, 2019 Share Posted April 30, 2019 3 minutes ago, Woodpusherghd said: Is this normal? No, and when it worked it isn't because being formatted by Windows, likely a connection issue. Quote Link to comment
Woodpusherghd Posted April 30, 2019 Author Share Posted April 30, 2019 (edited) That was my first thought as the drive was inserted into an IStar cage, so I tried the drive in a dock to see if it was recognized as an unassigned device, same result. Once formatted in Windows it was recognized as an unassigned device in the dock. Weird. Edited April 30, 2019 by Woodpusherghd Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.