jang430 Posted September 2, 2019 Share Posted September 2, 2019 Info: CPU- Kaby Lake Intel Celeron G3930, 2 cores 2 threads Motherboard- Asus H110M-K motherboard Things I've done so far: Changed my go script to: modprobe i915 chmod -R 777 /dev/dri # Start the Management Utility /usr/local/sbin/emhttp & Edited syslinux.cfg and added the the kernel parameter i915.alpha_support=1 For reference, my file looks like this: default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append initrd=/bzroot i915.alpha_support=1 label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest Booted the bios, and made sure primary display is "cpu graphics" IGPU Multi-Monitor= Enabled Above 4G Decoding= Enabled Went into EmbyServer docker container, and under Transcoding, Enable hardware acceleration when available= Yes Edited the EmbyServer docker container, under Extra Parameters, put in "--device /dev/dri:/dev/dri", under Container Variable: GIDLIST=18 Still not working. Am I still missing anything? Quote Link to comment
ken-ji Posted September 9, 2019 Share Posted September 9, 2019 in syslinux.cfg the i915.alpha_support option is not needed for your case so you can drop that. Try setting Emby Transcoding to Advanced. You should see a list of video codecs and any available HW decoders for them. ie. Quote Link to comment
jang430 Posted January 14, 2020 Author Share Posted January 14, 2020 (edited) Removing the following line gives me errors in non Gui mode. append initrd=/bzroot i915.alpha_support=1 Putting it back allows me to boot normally once again. Will resume further testing when this is fixed. Edited January 14, 2020 by jang430 additional information Quote Link to comment
scorcho99 Posted January 14, 2020 Share Posted January 14, 2020 What version of unraid are you running? Quote Link to comment
jang430 Posted January 15, 2020 Author Share Posted January 15, 2020 6.8.0. When I put this line back "append initrd=/bzroot i915.alpha_support=1" everything is well again. Quote Link to comment
jang430 Posted January 15, 2020 Author Share Posted January 15, 2020 I do get those options now. But still performing at 100% CPU. Quote Link to comment
ken-ji Posted January 15, 2020 Share Posted January 15, 2020 You might need to check with the Emby Devs on whats up with your media and why it cannot be decoded with HW acceleration. I had some transcoding issues before and it turns out it was a specific setting with regards to subtitles that was causing the format to fail and run in SW decoding instead. FYI: On 1/14/2020 at 8:28 PM, jang430 said: Removing the following line gives me errors in non Gui mode. append initrd=/bzroot i915.alpha_support=1 you don't remove the whole line. you just remove the i915.alpha_support=1 part Quote Link to comment
jang430 Posted January 15, 2020 Author Share Posted January 15, 2020 Got it!Sent from my iPad using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.