Array Device Show as Unassigned after reboot.

[Burgburger]

We had Power Failure - Load Shedding (Living is South Africa), shut down the server , boot up and all Array devices is missing, no Assign devices / Drives or Parity Drive. I still can see them in the drop down, But how to get it back to what it was ? 
Only thing installed prior was Unassigned Devices PLUS, remove it , but nope not remembering my array as it was. 

[trurl]

Your drive assignments are stored on flash, so there must be something wrong there. Do you have a backup of flash?

 

Go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post.

 

Then shutdown and put your flash in your PC and let it checkdisk. While in your PC, make a backup.

 

Then reboot your server with the flash, be sure to boot from a USB2 port.

[Burgburger]

I Do have a Backup of Flash - Just about 3 Months old, Just worried about loosing INFO etc,  

 

burgburger-diagnostics-20200110-2258.zip

[trurl]

Did you make any changes to your drive assignments since that backup was made?

[Burgburger]

No, none, just new VM`s and Dockers

[trurl]

Did you

16 hours ago, trurl said:

shutdown and put your flash in your PC and let it checkdisk. While in your PC, make a backup.

 

Then reboot your server with the flash, be sure to boot from a USB2 port.

Keep the old backup and make the new one also.

 

If it doesn't work after checkdisk then we can work with those backups to get things going.

 

[Burgburger]

Was worried that the device should be in a specific order to work, but it did`nt , just selected all drives and the parity (That one I knew) and there is goes.