Burgburger Posted January 10, 2020 Share Posted January 10, 2020 We had Power Failure - Load Shedding (Living is South Africa), shut down the server , boot up and all Array devices is missing, no Assign devices / Drives or Parity Drive. I still can see them in the drop down, But how to get it back to what it was ? Only thing installed prior was Unassigned Devices PLUS, remove it , but nope not remembering my array as it was. Quote Link to comment
trurl Posted January 10, 2020 Share Posted January 10, 2020 Your drive assignments are stored on flash, so there must be something wrong there. Do you have a backup of flash? Go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post. Then shutdown and put your flash in your PC and let it checkdisk. While in your PC, make a backup. Then reboot your server with the flash, be sure to boot from a USB2 port. Quote Link to comment
Burgburger Posted January 10, 2020 Author Share Posted January 10, 2020 I Do have a Backup of Flash - Just about 3 Months old, Just worried about loosing INFO etc, burgburger-diagnostics-20200110-2258.zip Quote Link to comment
trurl Posted January 10, 2020 Share Posted January 10, 2020 Did you make any changes to your drive assignments since that backup was made? Quote Link to comment
Burgburger Posted January 10, 2020 Author Share Posted January 10, 2020 No, none, just new VM`s and Dockers Quote Link to comment
trurl Posted January 11, 2020 Share Posted January 11, 2020 Did you 16 hours ago, trurl said: shutdown and put your flash in your PC and let it checkdisk. While in your PC, make a backup. Then reboot your server with the flash, be sure to boot from a USB2 port. Keep the old backup and make the new one also. If it doesn't work after checkdisk then we can work with those backups to get things going. Quote Link to comment
Burgburger Posted January 13, 2020 Author Share Posted January 13, 2020 Was worried that the device should be in a specific order to work, but it did`nt , just selected all drives and the parity (That one I knew) and there is goes. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.