soong Posted January 29, 2020 Share Posted January 29, 2020 I was coping some files to a share using the binhex-Krusder docker from a remote NFS Share using "Unassigned Devices". During the copy I got an email that said "Unraid Disk 3 error" and when I checked on the systems Disk 3 had a red "x" and was marked as "Device is disabled, contents emulated". I stopped the copy and shutdown the array. The drive was connected using a LSI 6Gbps SAS HBA LSI 9211-8i card. I had just run a pre-clear on the drive the day before and it passed. As I'm still testing things on the array and don't have anything important on it, I followed the steps to rebuild the drive with the same drive. I moved it to a SATA port directly on the motherboard for now. It rebuilt successfully and I plan on copying files to it and then switching it back to the LSI controller next to see what happens. What logs should I be looking in to see what caused the issue? Any other suggestions? Quote Link to comment
JorgeB Posted January 29, 2020 Share Posted January 29, 2020 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
soong Posted January 29, 2020 Author Share Posted January 29, 2020 Diagnostics: soong-diagnostics-20200129-1025.zip Quote Link to comment
JorgeB Posted January 29, 2020 Share Posted January 29, 2020 Unfortunately diags are after rebooting, disk looks mostly OK but there are some warnings on SMART, if it happens again save diags before rebooting. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.