zergom Posted February 7, 2020 Share Posted February 7, 2020 Totally new to unraid, came from OMV, still running the trial. I spent a day setting up all my docker images, figured that it was pretty clean and simple. Wake up this morning, no containers accessible. The web interface for Unraid is intermittently responsive, I can load the settings page, but can't really get into any settings, I can't get to the docker page. The share loads fine, I can connect via SSH. Quote Link to comment
JorgeB Posted February 7, 2020 Share Posted February 7, 2020 See if you can get the diags, either from the GUI (tools -> diagnostics) or by typing diagnostics on the console. Quote Link to comment
zergom Posted February 7, 2020 Author Share Posted February 7, 2020 I hard reset the system and everything came back up. I ran the "restart" command via SSH, but apparently it never executed that. I'm guessing something was locking the CPU or memory. So after the hard reset, I was able to generate diagnostics. Do you want the entire zip file, or is there just a particular section needed? Quote Link to comment
JorgeB Posted February 7, 2020 Share Posted February 7, 2020 Diags after a reboot don't do us much good, if it happens again try to download them before, then post the complete zip. Quote Link to comment
zergom Posted February 7, 2020 Author Share Posted February 7, 2020 (edited) Will do. I suspect I won't be able to get to those, tbh. I could get in via SSH, browse share, but even simple things like htop and nano failed to load, and my reboot command via SSH or the local console. Weird that it worked to browse the share, didn't try writing. Edited February 7, 2020 by zergom Quote Link to comment
JorgeB Posted February 7, 2020 Share Posted February 7, 2020 You can also do this. Quote Link to comment
zergom Posted February 10, 2020 Author Share Posted February 10, 2020 I think I might have figured it out. I had hardware transcoding enabled with Plex with only one GPU, 2 VM's, and 9 docker containers running. I disabled hardware transcoding and it hasn't crashed since. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.