Micro553 Posted March 17, 2020 Share Posted March 17, 2020 (edited) Hi I tried following the Spaceivader 1 guide on dual boot windows. I have made all the changes in Win. I have changed the UUID. I have found the VirtIO drivers (I think) BUT my Samung 970 don´t show in VM template. I have enable ACS override in "both" and VFIO and I have added the ID under Flash drive. Alla IMMOU groups are separated except one This IOMMU group 15:[1022:1440] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0 [1022:1441] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1 [1022:1442] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2 [1022:1443] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3 [1022:1444] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4 [1022:1445] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5 [1022:1446] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6 [1022:1447] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7 IOMMU group 16:[144d:a808] 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 As you can see my NVMe is in separate group. My sys linux looks like this. default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label Unraid OS menu default kernel /bzimage append pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot vfio-pci.ids=144d:a808,1022:149c,1022:1485 label Unraid OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 vfio-pci.ids=144d:a808,1022:149c,1022:1485 label Unraid OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label Unraid OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest Is it suppose to be with in GUI and non GUI unraid? I have only installed the NON gui! Can someone please have a look so I get this right? When I look I see the NVMe here swell as group 16 SCSI Devices [0:0:0:0]disk SanDisk Ultra Fit 1.00 /dev/sda 15.3GB [4:0:0:0]disk ATA Samsung SSD 860 2B6Q /dev/sdb 1.00TB [10:0:0:0]disk ATA WDC WD4003FZEX-0 1A01 /dev/sdc 4.00TB [N:0:4:1]disk Samsung SSD 970 EVO Plus 500GB__1 /dev/nvme0n1 500GB Thanks Edited March 17, 2020 by Micro553 more info Quote Link to comment
testdasi Posted March 18, 2020 Share Posted March 18, 2020 Your NVMe is not being stubbed otherwise it should show up in the Other PCI Devices section on the VM template and disappear from the SCSI Devices. Move your vfio-pci.ids section to just after append. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.