biggiesize Posted April 6, 2020 Share Posted April 6, 2020 Recently we had a major storm come through and after several hours of troubleshooting have found that my motherboard, RAM and CPU have all been friend from a power surge. The system will not boot no matter which components are switched out (Also verified CPU and RAM are dead on a different test system.). Luckily it looks like all of my drives and USB boot drive are still in working order, so far. If I were to put all drives and the USB boot drive into a new system, with similar but newer hardware, what complications should I expect? Will I need to start a new hardware config or will the OS automatically pick up the drives and know which is which? Or do I need to accept data loss and pull from an online backup with a new config? Quote Link to comment
JorgeB Posted April 6, 2020 Share Posted April 6, 2020 Array should start normally, assuming no RAID controllers, VMs might need adjustment especially if passing-through any hardware. Quote Link to comment
biggiesize Posted April 6, 2020 Author Share Posted April 6, 2020 31 minutes ago, johnnie.black said: Array should start normally, assuming no RAID controllers, VMs might need adjustment especially if passing-through any hardware. I have an LSI 9211-8i installed but it is convenient in IT mode. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.