_vern_ Posted April 8, 2020 Share Posted April 8, 2020 I installed 10gbe network card and it was working, but it was assigned as eth3. I had then unplugged 1gb ethernet from eth0. I had reassigned the VM manager to bridge (br3) which aligned with eth3. I then realized I could reassign the MAC address to eth0 which I thought would solve a couple of issue that I was seeing. When changed the MAC to point to eth0 it asked to reboot, and I did, and now I can't get to unraid other than at the local console. DHCP in my router shows the IP being assigned, but I can't ping it much less anything else. Looking for some assistance on how best to go about fixing this. Thanx! Quote Link to comment
JorgeB Posted April 8, 2020 Share Posted April 8, 2020 Delete/rename network.cfg and network-rules.cfg, both on flash/config, then reconfigure. Quote Link to comment
_vern_ Posted April 8, 2020 Author Share Posted April 8, 2020 Perfect! Thank you for the assist! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.