Guybrush Posted April 21, 2020 Share Posted April 21, 2020 (edited) Hello, Since this morning i have an issue with one of my drive. I tried to fix it following the wiki, and also the check seems to have work, i still have the error message. Quote Phase 1 - find and verify superblock... - block cache size set to 609952 entries Phase 2 - using internal log - zero log... zero_log: head block 3457412 tail block 3457405 ALERT: The filesystem has valuable metadata changes in a log which is being destroyed because the -L option was used. - scan filesystem freespace and inode maps... agi unlinked bucket 39 is 575475623 in ag 0 (inode=575475623) Metadata CRC error detected at 0x43c89d, xfs_cntbt block 0x1287f8ae0/0x1000 btree block 2/84930910 is suspect, error -74 bad magic # 0x241a9c92 in btcnt block 2/84930910 agf_freeblks 44072896, counted 0 in ag 2 agf_longest 34233820, counted 0 in ag 2 agf_btreeblks 4, counted 2 in ag 2 sb_fdblocks 608052500, counted 579841856 - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 2 - agno = 0 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - traversal finished ... - moving disconnected inodes to lost+found ... disconnected inode 575475623, moving to lost+found Phase 7 - verify and correct link counts... Maximum metadata LSN (1:3457407) is ahead of log (1:2). Format log to cycle 4. XFS_REPAIR Summary Tue Apr 21 16:46:09 2020 Phase Start End Duration Phase 1: 04/21 16:40:14 04/21 16:40:14 Phase 2: 04/21 16:40:14 04/21 16:42:08 1 minute, 54 seconds Phase 3: 04/21 16:42:08 04/21 16:42:14 6 seconds Phase 4: 04/21 16:42:14 04/21 16:42:14 Phase 5: 04/21 16:42:14 04/21 16:42:14 Phase 6: 04/21 16:42:14 04/21 16:42:20 6 seconds Phase 7: 04/21 16:42:20 04/21 16:42:20 Total run time: 2 minutes, 6 seconds done Any help would be appreciated. fractal-diagnostics-20200421-1654.zip Edited April 21, 2020 by Guybrush Quote Link to comment
JorgeB Posted April 21, 2020 Share Posted April 21, 2020 Start the array and it should mount, if it doesn't post new diags. Quote Link to comment
Guybrush Posted April 21, 2020 Author Share Posted April 21, 2020 Can't believe it was that simple ... But everything works fine now, thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.